Bedienungsanleitung Hitachi L22VG07U B (Seite 13 von 47) (Englisch)

572244

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

After all the available stations are stored, Channel

List will be displayed on the screen. If LCN (*) is

available in your country, a message appears on

the screen which asks you if you want to sort the

channels according to LCN.

In some countries, the order of the channels is

arranged automatically by the broadcaster. This

is called logical channel number (LCN). If the

selected country has LCN support, the channels

will be enumerated one by one, beginning from

number 1. You cannot move any programme to a

position after the last saved one. If you try to do

this, both programmes will change their places. If

LCN support is not available, you can move the

channels as you wish.

Press OK button to quit channel list and watch TV.

(*) LCN is the Logical Channel Number system that

organizes available broadcasts in accordance with a

recognizable channel sequence.

General operation

Press the SOURCE button on the remote control

for switching between the sources.

Information Banner

Whenever you change channel using the P-/P+

buttons or the numeric buttons, the TV displays

the broadcast picture along with an information

banner at the bottom of the screen.

The information banner can be displayed at any

time while watching TV by pressing the INFO

button on the remote control (ﬁ g.8).

Hint: Not all channels broadcast the programme data. If

the name and time of the programme are not available,

then information banner will be displayed with blanks.

If the selected channel is locked, you must enter the

correct four-digit numeric code to view the channel

(default code is 0000). “Enter PIN” will be displayed on

the screen in such a case.

Getting Started

Initial set up

When turned on for the ﬁ rst time, the “language

selection” menu appears. The message “Welcome

please select your language!” is displayed in all

language options listed alphabetically as shown

below.

Press the “ ” or “ ” button to highlight the

required language, press OK button to select.

“First Time Installation” appears. Use“ ” or “ ”

button to set the required country, and press “

” button to select “Teletext Language”. Use “ ”

or “ ” button to set the “Teletext Language” and

select “Scan Encrypted” using “ ” or “ ” button.

Set “Scan Encrypted” using “ ” or “ ” button

as shown below.

Press OK button on the remote control to continue

and the following message will be displayed on the

screen as shown below.

To start “Automatic channel scan” select Yes

(to cancel select No), highlight the item required

using the “

” or “ ” button and press OK button

to select.

The IDTV will automatically tune to the UHF

or VHF transmission channels, searching for

digital terrestrial and analogue (if available) TV

broadcasts.

IMPORTANT: Do not turn off the TV while

“First Time Installation” is in operation.

01_MB60_ypbpr_[GB]_(TV)_IDTV (ARGOS)_BRONZE17_1825UK_22915LED_10074404_50196881.indd 12 12.09.2011 17:29:54

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi L22VG07U B Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info