Bedienungsanleitung Hitachi l26a01 (Seite 11 von 35) (Englisch)

143490

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

- 10 -

Switching The TV ON/OFF

To switch the TV on:

Your TV will switch on in two steps:

1- Connect the power cord to the system. Press Power

On/Off switch. Then the TV switches itself to

stand-by mode (optional).

2- To switch on the TV from stand-by mode either:

Press a digit button on the remote control so that a

programme number is selected, or Press the "-P/CH"

or "

P/CH+" button on the TV or press the P+ or P-

button on the remote control, so that last mode

switched off is selected.

By either method the TV will switch on.

To switch the TV off:

• Press the “ (stand-by)” button on the remote con-

trol or On/Off switch on the TV, so the TV will switch

to stand-by mode.

To power down the TV completely, press On/Off

switch

or,

Unplug the power cord from the mains socket.

Navigating the Menu System

GUIDE

RETURN

For Displaying

Menu Options

For Navigation

To Confirm Choices

1- Press to display the menu.

2- Press

button to select an icon.

3- Use

button to highlight. Press

for more

options in analogue TV mode. Use OK in DTV mode

for viewing a submenu.

4- Press

buttons to change the settings. Press

OK to set as default.

5- To exit the menu or return from sub-menu screen,

press

These explanations are available for the navigation

of the whole menu system. To select options that are

explained in the following parts, refer to “Navigating

The Menu System”.

Initial Settings

When the TV is turned on for the first time, Auto

Programme menu will be displayed on the screen

Because this is the first time the TV is used, there are no

channels stored in the memory and the following message

appears on the screen.

Country

Language

Cancel

PLEASE CHECK ANTENNA CABLE

AUTO. PROGRAMMING SYSTEM

TXT Language

Auto Program

By pressing or button, adjust the Country item

and press

to highlight “Language” item. Use

or button to set “Language”. Use or but-

tons to select “TXT Language” and set it by using

or buttons. Press “OK” button to continue:

For more information on this process, see “

Install

Menu” section.

Basic Operations

You can operate your TV using both the remote

control and onset buttons.

Operation with the buttons on the TV

Volume Setting

• Press - button to decrease volume or +

button to increase volume, so a volume level scale

(slider) will be displayed at the middle of the bottom

on the screen.

Programme Selection

• Press P/CH + button to select the next programme or

P/CH - button to select the previous programme.

Entering Main Menu

• Press the MENU button to enter Main menu. In the

Main menu select sub-menu using P/CH - or P/CH +

buttons and enter the sub-menu using

- or

+ buttons. To learn the usage of the menus, refer to

the Menu System sections.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi l26a01 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi l26a01

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info