Bedienungsanleitung Hitachi l26a01 (Seite 15 von 35) (Englisch)

143490

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

- 14 -

justments of Contrast, Brightness, Sharpness, Colour,

Reset and Store items in this part are identical with

Picture menu in the Menu System. Refer to Picture

menu explanations in the previous parts.

PAP Source

Select PAP Source item by using

button. Use

button to set PAP source.

Note: When main picture source is TV, AV-1, AV-2

or AV-3, PIP window can only be set to

HDMI-1, HDMI-2, YPbPr (AV-5), PC source or vice

versa.

PAP SWAP

Select PAP SWAP item by using

button. Use

button. This function enables to swap between

the main and the PAP picture.

Note: See Appendix C for all PIP/PAT modes.

Sleep Timer

By pressing

select Sleep Timer. Press

button to set the Sleep Timer.

The timer can be programmed between Off and 120

minutes in steps of 10 minutes.

Child Lock

By pressing

select Child Lock.

Press

button to set the Child Lock on or off.

When on is selected, the TV can only be controlled by

the remote control handset. In this case the control

panel buttons will not work (except for the

STANDBY

button). Hence, if one of these buttons is pressed,

“Child Lock On” will be displayed on the screen when

the menu screen is not visible.

Language

By pressing

button, select Language.Use

button to select the language. Available language

options are; English, French, German, Italian, Span-

ish, Portuguese, Dutch, Greek, Swedish, Norwegian,

Danish, Finnish, Turkish, Croatian, Slovenian, Polish,

Czech, Hungarian, Russian, Bulgarian, Greek, Slo-

vak.

AV-2 Out

By pressing

select AV-2 Out.Use

button,

to set AV-2 Out to TV, AV-1, AV-3, FAV, YPbPr Au-

dio or PC Audio

Note: When TV Source is set to HDMI, HDMI Audio

setting will be available among AV-2 Out options.

PC Audio In

By pressing

select Pc Audio In.By pressing

button, you can change the PC Audio In to TV,,

AV-1, AV-2, AV-3, FAV, YPbPr Audio, PC Audio.

Blue Background

You can set the TV to automatically change to a blue

screen if the signal is weak or absent, or when there

is no input from an external device.

The Blue Background feature can be turned on or off

by pressing

button.

Menu Background

By pressing

button, select Menu Background.

Transparency level is adjusted by pressing

button.

Menu Timeout

By pressing

button, select Menu Timeout.

Press

button to change menu timeout to 15 sec,

30 sec or 60 sec.

Teletext Language

By pressing

button, select Teletext Language.

Press

button to change Teletext Language to

West, East, Turk/Greek,Cyrillic, or Arabic.

Default Zoom

Default zoom is a feature that provides the zoom mode

of the TV set to be switched to the selected default

zoom mode (Panoramic, 4:3 ,14:9 zoom) in case no

WSS or 4:3 signal by end-user.

By pressing

button, select Default Zoom. Youou

can set Default Zoom to Panoramic, 4:3 or 14:9 Zoom

by pressing

button.

Install Menu

INSTALL

Program Table

Program

Band

Channel

Colour System

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi l26a01 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi l26a01

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info