Bedienungsanleitung Hitachi L26H01E (Seite 27 von 45) (Englisch)

512003

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

- 26 -

H (Horizontal) Position

This item shifts the image horizontally to right hand

side or left hand side of the screen.

• Select H Position item by using





button.

• Use





button to adjust the value.

V (Vertical) Position

This item shifts the image vertically towards the top or

bottom of the screen.

• Select V Position item by using





button.

• Use





button to adjust the value.

Phase

Depending on the resolution and scan frequency that

you input to the TV Set, you may see a hazy or noisy

picture on the screen. In such a case you can use

this item toget aclear picture bytrialand errormethod.

• Use





button to adjust the value.

Dot Clock

Dot Clock adjustments correct interference that ap-

pear as vertical banding in dot intensive presenta-

tionslikespreadsheets or paragraphs ortext insmaller

fonts.

• Use





button to adjust the value.

Sound in PC mode

• Connect the PC’sAudio output to the TV’s PC Audio

In socket with an audio cable.

Other Features

TV Status

Programme Number, Programme Name,

Sound Indicator and Zoom Mode are displayed

on the screen when a new programme is entered.

Mute Indicator

It is placed in the upper side of the screen when

enabled.

Mute

To cancel mute, there are two alternatives; the first

one is pressing the

button and the second one is

increasing the volume level.

PIP and PAP Modes

PIP picture is displayed on the screen by pressing

button .At PIP Mode, a smallpicture (PIPpicture)

is displayed in the main picture.

When PIP Mode is entered, the default active window

is PIP window and the active window is indicated by

a red frame around it. The active window can be

changed by pressing





buttons.

PIP position can be changed by pressing





but-

tons.

When

button is pressed again, the TV switches

to PAP mode. In PAP Mode, two pictures with equal

sizes are displayed on the screen. Aspect Ratios of

the windows are fixed.

When you switch to PAP Mode, main window in PAP

Mode is displayed on the right side of the screen. The

active window can be changed by pressing





button.

Press the

button again to exit the PAP mode.

Note: When main picture source is TV, AV-1, AV-2,

AV-3 or AV-4; PAP or PIP window can only be

set to HDMI-1, HDMI-2, YPBPR, PC source or

vice versa.

AV Modes

You can switch your TV to AV modes by using re-

lated buttons on the remote control.

First, press

button till INPUT OSD is displayed

on the screen. You can then use; AV1, AV2, AV3,

AV4, AV5, HDMI1 or HDMI2 buttons on your remote

control to select the desired source (except being in

teletext).

Note that in PIP/PAP modes, pressing

button

will directly change sources.

A01-IB-ENG-(L26H01E)-MB22-PANEU-26810W-(RRC1001-2511E)-(BASIC PIP)-10049810-50109125.p6512.06.2007, 13:2626

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi L26H01E Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi L26H01E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info