635084
39
Zoom out
Zoom in
Vorherige Seite
1/54
Nächste Seite
37
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Installing Channels
You can search available channels in any of the following 3 methods.
1. Press
button on the remote control in DTT mode.
2. Select “Installation”, on the DTT main menu with
buttons and press button.
3. The password is required to enter the Installation menu. The initial password is 0000.
4. You can select either of the followings by pressing
button.
x
Manual scan:
Searches by individual settings manually.
The box shown on the right appears. Fill out the following 4 items as needed.
Channel
num
Use buttons or numeric button to enter the number.
(Ch2-Ch69) *In case of tuning Ch9A, select Ch2
(Frequency: 205.5MHz.).
Frequency Use numeric button to enter the frequency.
Bandwidth
Select either 7MHz or 8MHz by using buttons. Set to
7MHz normally.
Priority
Select High or Low by using buttons. Set to High
normally.
Then, press button on “Start scan” of “Manual scan” column. If it finds a
channel, “Success” shows up. If not, “Timeout error” is displayed.
x
Quick scan:
Searches channels of the selected area.
The list of the area shows up. Select one of those with buttons and press
button.
NOTE
x If you are uncertain about the area, please select “Auto scan” method or contact
the local dealer in your area.
x
Auto scan:
Searches every channel.
The message “Auto scan will take more than 10 minutes. Do you want to
continue?”
Select “Yes” and press
button to precede it.
Restoring Channels
This restores the all channel settings.
1. Press
button on the remote control in DTT mode.
2
. Select
“Installation”
, on the DTT main menu with buttons and press button.
3
. The password is required to enter the Installation menu. The initial password is 0000.
4. Select “Restore default” and press button. The message “All setting
would be lost” appears. Select “Yes” and press button.
NOTE
x
The password will return to the default setting when activating “Restore
default/
Installation
Manual scan
Quick scan
Auto scan
Restore default
Channel num 6
Frequency 177500KHz
Bandwidth 7 MHz
Priority High
Manual scan Start scan
Installation
Manual scan
Quick scan
Auto scan
Restore default
Adelaide
Brisbane
Melbourne
Perth
Sydney
Batchelor
Canberra
Darwin
Press Ÿźto select city.
Installation
Manual scan
Quick scan
Auto scan
Restore default
Auto scan will take more
than 10 minutes.
Do you want to continue?
Yes Exit
Installation
Manual scan
Quick scan
Auto scan
Restore default
All setting would be lost.
Yes Exit
39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

hitachi-l32h01au

Suche zurücksetzen

  • wo befindet sich der Knopf für an und aus schalten des gerätes Eingereicht am 10-4-2017 16:00

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hitachi L32H01AU wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info