Bedienungsanleitung Hitachi L32HR1U (Seite 29 von 45) (Englisch)

572193

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

- 28 -

Other Features

TV Status

Programme Number, Programme Name,

Sound Indicator and Zoom Mode are displayed

on the screen when a new programme is entered.

Mute Indicator

It is placed in the upper side of the screen when

enabled.

Mute

To cancel mute, there are two alternatives; the first

one is pressing the

button and the second one is

increasing the volume level.

PIP and PAP Modes

PIP picture is displayed on the screen by pressing

button . At PIP Mode, a small picture (PIP picture)

is displayed in the main picture.

When PIP Mode is entered, the default active window

is PIP window and the active window is indicated by

a red frame around it. The active window can be

changed by pressing

buttons.

PIP position can be changed by pressing

but-

tons.

When

button is pressed again, the TV switches

to PAP mode. In PAP Mode, two pictures with equal

sizes are displayed on the screen. Aspect Ratios of

the windows are fixed.

When you switch to PAP Mode, main window in PAP

Mode is displayed on the right side of the screen. The

active window can be changed by pressing

button.

Press the

button again to exit the PAP mode.

Note: When main picture source is TV, AV-1, AV-2,

AV-3 or AV-4; PAP or PIP window can only be set to

HDMI-1, HDMI-2, YPBPR (AV5), PC source or vice

versa.

AV Modes

You can switch your TV to AV modes by using re-

lated buttons on the remote control.

First, press

button till INPUT OSD is displayed

on the screen. You can then use; AV1, AV2, AV3,

AV4, AV5, HDMI1 or HDMI2 buttons on your remote

control to select the desired source (except being in

teletext).

Note that in PIP/PAP modes, pressing

button

will directly change sources.

Zoom Modes

Zoom mode can be changed by pressing the

button. You can change the screen size according to

the picture aspect ratio. Select the optimum one from

the following ZOOM modes.

Note:

• In YPBPR and HDMI modes, while in 720p-1080i

resolutions, only FULL mode is available.

• In PC mode, only 4:3 and 16:9 modes are available.

Auto

When a WSS (Wide Screen Signalling) signal,

which shows the aspect ratio of the picture, is in-

cluded in the broadcast signal or the signal from an

external device, the TV automatically changes the

ZOOM mode according to the WSS signal.

• When the AUTO mode does not function correctly

due to poor WSS signal quality or when you want to

change the ZOOM mode, change to another ZOOM

mode manually.

Zoom

This uniformly stretches the left and right sides of a

normal picture (4:3 aspect ratio) to fill the wide TV

screen.

• For 16:9 aspect ratio pictures that have been

squeezed into a normal picture (4:3 aspect ratio),

use the Full mode to restore the picture to its original

shape.

Cinema

This zooms up the wide picture (16:9 aspect ratio) to

the full screen.

16:9 Zoom

This zooms up the wide picture (16:9 aspect ratio) to

the full screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi L32HR1U Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info