Bedienungsanleitung Hitachi L37V01 (Seite 26 von 42) (Englisch)

65841

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

English -25-

Other Features

TV Status

Programme Number, Programme Name,

Sound Indicator and Zoom Mode are displayed

on the screen when a new programme i s entered or

button is p ressed.

Mute Indicator

It is placed in the upper side of the screen w hen

enabled.

To c ancel mute, there are tw o alternatives; the first

one is pressing the

button and the second one is

increasing the volume level.

PIPandPAPmodes

Press the button to switch to PIP mode.

At PIP Mode, a small picture (PIP picture) is displ ayed

on the main picture. Aspect Ratio of the P IP window is

fixed and 4:3.

When PIP Mode is entered, the default active window

is PIP window and the active w in dow is indicated by

a white frame around it. The active window can be

changed by pressing

button. The status info

OSD belongs to active w indow. The place of the sta-

tus OSDs are same for both windows.

Press the

button again to switch PAP mode.

At P AP Mode, two pictures with equal sizes are dis-

played on the screen. Aspect Ratios of the windows

are fixed.

When you switch to PAP Mode, Main window in PIP

Mode is displayed on the right side of the screen. The

active window can be changed by pressing

_ /

button.

Press the

button again to exit the P AP mode .

NOTE: In all HDMI m odes, Pip and P AP are not vis-

ible. In YPbPr 1080i , Pip is not visible.

NOTE: See Appendix C for all PIP/P AT modes.

PAT

In P AT ( Picture and Text) mode, picture is splitted into

two and text is displayed near the main picture.

TherearetwowaysavailableforswitchingtoPAT

mode :

•Pressing

button while in teletext will switch the

TV to PAT mode.

• While the P AP function is off, pressing

twice will

switchtheTVtoPATmode.

AV M odes

You can switch your TV to AV modes by using re-

lated buttons on the remote control.

First, press

button till INPUT OSD is displayed

on the screen. You can then use; AV 1 , AV 2, AV 3 ,

AV 4, AV 5, HDMI1 or HDMI2 buttons on your remote

control to select the desired source (except being in

teletext).

Note that in PIP/PAP modes, pressing

button

will directly change sources.

Free ze Picture

You can freeze the picture on the screen by pressing

the OK button. At PIP and P AP layouts, only the main

picture c an be frozen.

Zoom Mod es

Zoom m ode can be changed by pressing the REC

button. You can change the screen size according to

the picture aspect ratio. Select the optimum one from

the following ZOOM modes.

NOTE: InYPBPR and HDMI modes,while in 720 and

1080 resolutions, Full 1 and Full 2 modes

will be visible.

NOTE: When in “Full 1” mode; if picture defects in

top and bottom lines occur because of the

broadcast, switch to “Full 2” m o de to avoid. If

such defects in the edges of picture ar e not

experienced, it is a dvised that you watch i n

“Full 1” mode.

NOTE: You can only c hoose 4:3 and FULL in P C

mode.

Auto:

When a WSS (Wide Screen Signalling) s ig nal ,

which show s the aspect ratio of the pi cture, is in-

cluded in the broadcast signal or the signal from an

external device, t he TV automatically changes the

ZOOM mode according to the WSS signal.

• When the AUTO mode does not function correctly

due to poor WSS signal quality or when you want to

change the ZOOM mode, change to another ZOOM

mode manually.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi L37V01 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi L37V01

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info