Bedienungsanleitung Hitachi l37vp01 (Seite 20 von 38) (Englisch)

143398

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

English - 19 -

Programme Timers

No Channel Name Start End Date Mode

1. ITV 1 20:00 21:00 12/05/2005 Active

2. BBC ONE 00:00 00:00 01/01/2005 Inactive

3. BBC ONE 00:00 00:00 01/01/2005 Inactive

4. BBC ONE 00:00 00:00 01/01/2005 Inactive

5. BBC ONE 00:00 00:00 01/01/2005 Inactive

6. BBC ONE 00:00 00:00 01/01/2005 Inactive

Move/Change

Exit

Edit Timer More

10:42

04/07/2005

• To set an event, highlight its mode button using or

buttons and press OK button to display the timer

entry window.

Type:

Name:

Start:

End:

Date:

Mode:

3. ITV

00:00

03/06/2005

Once

• Here the six settings of channel type, channel name,

start time, end time, date and frequency mode can

be set. You can move freely between each setting

using

or buttons.

• The channel type is set using

or buttons. It

enables displaying only the selected type channels.

• The channel name is set using

or buttons to

display the channel which broadcasts the

programme.

• The start time, end time and date are each set with

the number buttons on the remote control in 24-hour

format.

• The frequency mode determines how often the re-

ceiver operates this event and is set with the

buttons to be either Once, Daily, or Weekly.

Hint

If an invalid number for the start or end times

or the date is entered, “Entered time is not

valid” message appears on the menu.

TV Setup

To be able to go through TV functions, you can use

this item.

The digital TV Setup menu screen is accessed from

the Main Menu. Press the

button to display the

Main Menu and use

or buttons to highlight “TV

Setup”

. Press OK button to display TV Setup menu

screen.

Main Menu

Channel List

Installation

Configuration

Timers

TV Setup

Common Interface

Detailed information for all menu items is in Analogue

TV Menu System section.

Common Interface

• Press button to display the Main Menu and use

the

or buttons to highlight the “Common

Interface” line and press OK button.

Main Menu

Channel List

Installation

Configuration

Timers

TV Setup

Common Interface

It is required to subscribe to a pay channel company

to view the pay channels of the Digital Terrestrial broad-

casting. Obtain the Conditional Access Module (CAM)

and the Viewing card by subscribing to a pay chan-

nel company, then insert those to the Television using

the following procedure.

1. Switch off the TV and unplug from the mains.

2. Insert the CAM, then Viewing Card to the slot that is

located in the terminal cover at the left-hand side

of the TV (from front view).

• The CAM should be correctly inserted, it is impos-

sible to insert fully if reversed. The CAM or the TV

terminal may be damaged if the CAM is forcefully

inserted.

3. Connect the TV to the mains supply, switch on and

then wait for few moments until the card is acti-

vated.

• Some CAMs may require the following set up. Please

set the CAM by entering the IDTV menu, Common

Interface then pressing

OK button. (CAM set up menu

is not displayed when it is not required.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi l37vp01 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi l37vp01

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info