Bedienungsanleitung Hitachi L37X01AU (Seite 55 von 60) (Englisch)

635085

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

TROUBLESHOOTING (continued)

Symptom and Check List (continued)

Symptoms Check list

Page

No picture – normal sound

Check the value level of “Brightness” and “Contrast” in “Picture

Menu”.

The remote control does not

work.

Check if the batteries are installed correctly.

The batteries might be exhausted. Replace them with new ones.

Remove all the obstructions in front of the sensor window on the

unit.

Check if the buttons of the control panel can work.

Normal picture but no

color-normal sound

Check the connection of the external equipment.

Check the “Color” in “Picture Menu”.

Image is paused.

Check if the TV is in freeze mode by pressing button.

No picture

The Indicating lamp ĺ Off

Check if the Power Cord is plugged into the socket firmly.

Check if the Main Power is ON.

No picture

The Indicating lamp ĺ Orange

It means that the unit is in

“Power Save Mode”.

Check if all the cables of the external equipment are connected

correctly and firmly.

Check if the power of the external equipment is ON.

Check if the TV/AV mode has been selected correctly.

Check if the PC is in Power Save mode or not.

Refer to “Power Save mode” and “When following messages

appears on the screen”

No picture

The indicating lamp ĺ Green

Check if the signal cable is connected correctly and firmly.

Adjust the level of Brightness and Contrast lower.

The top of the television and

surface of the panel heat up.

It may happen when you use the unit for long hours. Turn off the

Main Power of the unit for a while. Please note that this is not all

function.

Image cannot be displayed in

the correct position.

Press Recall button to check if the input signal of the displayed

image is compatible with the specification of the television.

When the VCR is in special

playback features (Fast forward

or Rewind), the screen gets

dark and cannot see the image

at all.

It could happen when the VCR is connected to Component output,

such as 480i. This is not malfunction.

Try Composite output or S-video output and check the picture again.

The images are not displayed

on sub pictures (right side) in

“Multi Picture mode”

There are some combinations of input signals that the images are

not displayed on sub pictures (right side).

Please check the Table of “Multi Picture Function” for details.

Some screen display size

cannot be switched.

Check the signal status by pressing the button on the remote

control. The available screen display size is different depending on

the current signal status.

Cannot be displayed the image

from HDMI 1~3

Check if the cables are connected correctly.

Check the output format of the equipment.

(Please refer to “Connecting Procedure” and “Recommended Signal

List”.)

The image and audio are

mismatched when in RGB or

HDMI 1~3 mode.

Check if the PC (RGB)/HDMI analog audio input terminal is

connected to the same external device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi L37X01AU Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info