Bedienungsanleitung Hitachi L46VF04U (Seite 31 von 49) (Englisch)

572252

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Accessing Installation Menu

1. Press “MENU” button on the remote control and

select Installation by using “ ” or “ ” button.

2. Press “OK” button and the Installation screen will

be displayed.

Automatic Channel Scan (Retune)

1. In the Installation menu, select “Automatic Channel

Scan (Retune)” by using

“ ” or “ ” button and press

OK button.

2. Options will be displayed. You can select options by

using “ ” or “ ” and OK buttons.

Menu Operations

Digital Aerial: Searches and stores aerial DVB

stations.

Analogue: Searches and stores analogue stations.

Digital & Analogue: Searches and stores both

analogue and aerial DVB stations.

3. Whenever you select an automatic search type and

press OK button, a conﬁ rmation screen will appear on

the screen. To start installation process, select Yes,

to cancel select No by using “ ” or “ ” and “OK”

button.

4. After auto channel scan type is set and selected and

conﬁ rmed, installation process will start and progress

bar will move along.

If desired, press “MENU” button to cancel process. In

such a case, located channels are not stored.

Advanced Features

Setting the channels

Manual Channel Scan

1. In the Installation menu, select “Manual Channel

Scan” by using “ ” or “ ” button and press OK

button.

2. Manual Scan options screen will be displayed.

Select the desired “Search Type” using “ ” or “ ” button.

Manual search options will change accordingly.

3. Enter the multiplex (for digital manual search) or

frequency number (for analogue manual search) using

the numeric buttons and press OK button to start

search.

Analogue Fine Tune

1. Select “Analogue Fine Tune” from the Installation

menu by using “ ” or “ ” and OK buttons. Analogue

ﬁ ne tune screen will be displayed.

NOTE: Analogue Fine Tune feature will not be

available if there are no analogue channels, digital

channels and external sources stored.

2. Press OK button to proceed. Use “ ” or “ ” button to

set Fine Tune. When ﬁ nished, press OK button again.

First Time Installation

Deletes all stored channels and settings, resets

TV to factory settings and starts first time

installation.

1. Select First Time Installation option and press

OK button if you would like to reset the TV.

2. A warning screen will be displayed. Select YES

and press OK to continue. All prestored channels

and settings will be deleted in such a case.

3. The TV will reset after a short time and language

selection menu will be displayed.

4. Follow the steps in the Initial set up section.

Clear Service List

(*) This setting is visible only when the Country option

is set to Denmark, Sweden, Norway or Finland.

1. Use this setting to clear channels stored. Press

“ ” or “ ” button to select Clear Service List and

then press OK.

2. An OSD message will be displayed on the

screen. Press OK to cancel or select Yes to delete

all of the stored channels.

01_MB62_ypbpr_[GB]_IDTV (ARGOS)_BRONZE19_1825UK_26915LED_10076298_5020xxxx.indd 30 14.11.2011 19:56:35

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi L46VF04U Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info