Bedienungsanleitung Hitachi NV90AB2 (Seite 12 von 50) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

568915

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

English

APPLICATIONS

⅜ Construction wooden works such as floor and wall

framing, roof decking and subflooring.

⅜ Mobile and modular home construction.

⅜ Making wooden boxes, palletes, and drums.

⅜ Packing operations in manufacturing plants, and other

types of packing and crating work in general.

PREPARATION PRIOR TO OPERATION

1. Prepare the hose

Be sure to use the hose provided with minimum 8.5

mm (11/32”) inside diameter.

NOTE

The air supply hoses must have a minimum working

pressure rating of 12.8 bar (180 psi) or 150 percent of

the maximum pressure produced in the air supply

system, whichever is higher.

2. Check on safety

CAUTIONS

⅜ Unauthorized persons (including children) must be

kept away from the equipment.

⅜ Wear eye protector.

⅜ Check the retaining screws which fix the exhaust

cover, etc. for tightness.

Check the nailer for air leaks and defective or rusty

parts.

⅜ Check whether or not the push lever works correctly.

Also check whether or not any dirt has adhered to the

moving parts of the push lever.

⅜ Recheck on operational safety.

BEFORE USE

1. Check the air pressure

CAUTION

The air pressure must be constantly maintained at

4.9 – 8.3 bar (70 – 120 psi.).

Adjust the air pressure between 4.9 to 8.3 bar (70 ~

120 psi.) according to the diameters and length of

nails and hardness of the wood being nailed. Pay

special attention to the output pressure, capacity,

and piping on the air compressor, so that air pressure

does not exceed the specified limit. Note that

excessive pressure may affect overall performance,

service life, and safety.

2. Lock mechanism of the trigger

This device has a lock mechanism to prevent the

trigger from pulling.

Set the lock lever to “Lock” position to lock the trigger

in place.

Dimensions of nails

STANDARD ACCESSORIES

(1) Eye protector .............................................................. 1

(2) Hexagon bar wrench for M4 screw ........................... 1

(3) Hexagon bar wrench for M5 screw ........................... 1

(4) Hexagon bar wrench for M6 screw ........................... 1

(5) Hexagon bar wrench for M8 screw ........................... 1

(6) Oiler ............................................................................. 1

(7) Nose cap ..................................................................... 1

OPTIONAL ACCESSORY

⅜ Sequential Trip Mechanism Kit (Code No. 883-330)

(Sequential Fire Parts Set, Single Shot Parts)

With the sequential fire parts,the nail is driven only

by squeezing the trigger after pushing down the

push lever.

By installing these parts, driving nails into improper

positions and unexpected firing of nails caused by

accidental operation of the push lever can be

prevented.

NAIL SELECTION

Wire collated nails and plastic collated nails can be driven

with this tool.

Choose a suitable nail from Fig. Nails which are not

shown in Fig. can not be driven with this tool. Nails are

linked and rolled.

SPECIFICATIONS

Type of power Piston reciprocating

Air pressure (Gauge) 4.9 – 8.3 bar (70 – 120 psi.)

Applicable nails ref. Fig.

Amount of loadable nails 150 – 300 nails (1 coil)

Size 317 mm (L) × 348 mm (H) × 132 mm (W) (12-31/64” × 13-3/4” × 5-3/16”)

Weight 3.0 kg (6.6 lbs)

Nail-feeding method Piston reciprocation

Hose (inside diam.) 8.5 mm (11/32”)

Wire-collatd coil nails Sheet-collated coil nails

MIN. MAX. MIN. MAX.

6 mm 7.6 mm 6 mm 6 mm

(.236”) (.300”) (.236”) (.236”)

50 mm (2”)

2.5 mm

(.099”)

2.5 mm

(.099”)

90 mm (3-1/2”)

45 mm (1-3/4”)

3.8 mm

(.148”)

2.5 mm

(.099”)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi NV90AB2 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info