Bedienungsanleitung Hitachi P42A01 (Seite 22 von 37) (Englisch)

67593

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

ENGLISH

BASIC OPERATION (continued)

Conceal stored channels

Picture format

Press , then press ϳ or ϴ to select desired picture format, then press ENTER.

AUTO

Automatically selects the aspect ratio (see note below).

NOTE

In case a screen switches with AUTO operation, the screen may become black for a moment according to

the conditions of a weak-electric-field and an input signal, but it is not a failure.

4:3

It shows a 4:3-picture in original size with grey bands on left and right side.

FULL

Stretches the left and right hand sides of a 4:3 picture horizontally to fill the screen, while leaving

the centre of the picture unstretched.

NOTE

In this mode the picture is geometrically distorted on the left and the right sides of the screen.

PANORAMIC

This mode is used with 16:9 signals from a Digital decoder, a DVD player or other external

source. This uniformly stretches a 4:3 image horizontally to fill the screen (For example, a 16:9

image is often stored “anamorphically” on a DVD, where the 16:9 image is stored as a horizontally

compressed 4:3 image - this mode restores the image to its correct 16:9 proportions).

ZOOM

This mode is used to zoom-in on (expand) 4:3 “letterbox” format pictures (with grey bars at the top

and bottom) so that they fill more of the screen.

NOTE

In the ZOOM mode, part of the picture may be slightly cut off due to the expansion. However, it is possible to scroll the picture up or

down to view the top or bottom part of the picture

14:9

This enlarges a 4:3 picture to the 14:9 format.

NOTE

When the Picture format is set to AUTO, the aspect ratio will automatically change according to the Wide Screen Switching (WSS)

signal, if it is available. This may be either transmitted by the broadcasting TV channel, or via a recording from a VCR etc. Any WSS

signal received will only be effective in the AUTO mode - however, some DVD players / Digital Decoders etc. will automatically

switch the aspect ratio via the SCART input (Pin 8 switching), even if AUTO is not selected. In any case if you want to change to a

different aspect ratio to the one selected automatically, you can change it by pressing

In PC mode, the Picture format is available only for 16:9 or 4:3 format. (In “WXGA INPUT” and “WVGA INPUT” mode, the Picture

format is not available.)

In HDMI or COMPONENT mode of scanning rate: 720p and 1080i, the Picture format is available only for FULL1, FULL2 and

ZOOM format.

•

SUBTITLE SUBTITLE

You can conceal certain channels so that when you use the P+ or – buttons they are skipped.

In this case these channels are not deleted - they can be accessed at any time using the 10 Number Buttons.

Select the channel to be concealed (i.e. CH29).

Press SKIP. The programme number flashes.

Select the next channel to be concealed.

Press SKIP. The programme number flashes.

You can conceal as many channels as you like.

Cancel concealment of channels

Select the concealed channels with the 10 Number Buttons.

The programme number flashes.

Press SKIP. The programme number no longer flashes.

This channel is no longer concealed.

(FULL)

(PANORAMIC)

(ZOOM)

(14:9)

[0-5 ] : SELECT

PICTURE SIZE

0.AUTO

1.4:3

2.FULL

3.PANORAMIC

4.ZOOM

5.14:9

:SETENTER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi P42A01 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi P42A01

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info