Bedienungsanleitung Hitachi P42TP01U (Seite 64 von 71) (Englisch)

51334

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

ENGLISH

TROUBLESHOOTING

Before calling service technician, check the following tables ﬁ rst. If the problem is not be solved with the suggested

procedures, contact your local dealer. For your safety, NEVER try to repair the product by yourself.

When Following Messages Appear on the Screen

Message Condition / Action Page

Power saving

This indicates it is in Power Save mode.

The indicating lamp pulses Blue or lights Red.

No sync. signal

The unit cannot detect any signals from any input terminals.

• Check if the cable is connected correctly and ﬁ rmly.

• Check if the power of any external equipment is ON.

• Check if the input selection matches the connection terminal.

Not available This shows when the selected operation is not available.

Please push Return button.

This message appears when you select other than button whilst Screen Wipe is ON.

Press button when this message appears.

Check Aerial Check the connection status when this message appears. (in TV mode)

Weak signal or channel not

available. Check aerial.

• Check aerial lead if it is disconnected / damaged / misaligned.

• Check with your dealer if it is out of signal area or not. (in DTT mode)

Encrypted Channel • Check if the common interface module inserted correctly. (in DTT mode)

Symptom and Check List

Symptoms Check list Page

No picture - no sound

•

Check the Indicating lamp status.

•

Check the connection of the Power Cord and/or other

cables.

•

Check if the Main Power of the unit or external equipments is ON.

• Check if the TV mode is selected.

•

Check if the TV is in “Standby mode” or “Power Save mode”.

• Adjust the values in “Picture menu” and “Audio menu”.

Snowy picture-poor sound

• Check the aerial connection and direction.

• The TV station may have broadcast difﬁ culties.

Try another channel.

Multiple images-normal sound

• Check the aerial connection and direction.

• Fine tuning the TV.

• Check the connection of the external equipments.

•

The TV station may have broadcast difﬁ culties. Try another channel.

Intermittent interference

• Check if the source of interference is shielded well.

• Remove those kinds of electrical devices away from the TV.

Normal picture, but no sound

• Check the volume level.

• Check if the

button has been pressed or not.

• Make sure that the headphone is NOT connected.

• Check the connection of the external equipments.

No picture - normal sound

• Check the value level of “Brightness” and “Contrast” in

“Picture Menu”.

• Check if Radio broadcasting channels are received. (DTT

mode only)

The remote control does not work.

•

Check if the batteries are installed correctly.

•

The batteries might be exhausted. Replace them with new ones.

•

Remove all the obstructions in front of the sensor window on the unit.

• Check if you select the correct function by Function Select

(TV/DTT, DVD and SAT) buttons on the remote control.

• Check if the buttons of the control panel can work.

Normal picture but no colour-normal

sound

• Check the connection of the external equipments.

• Check the “Colour System” in “Initial Setup” menu.

• Check the “Inputs Outputs” in “Initial Setup” menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi P42TP01U Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi P42TP01U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info