Bedienungsanleitung Hitachi SV 13 YA (Seite 22 von 29) (Englisch, Dänisch, Schwedisch, Norwegisch, Finnisch)

79019

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

English

PRACTICAL OPERATING PROCEDURES

CAUTION

Never apply water or grinding fluid when sanding.

This could result in electrical shock.

1. Switching the sander ON and OFF

The power can be turned on by setting the lever to

ON (1) and turned off by setting the lever to OFF (0).

CAUTION

Never turn the power switch ON when the sander is

contacting the surface to be sanded. This is necessary

to preclude damage to the material. The same applies

when switching the power OFF.

2. How to hold the random orbit sander

While gripping the housing, lightly press the sander

against the surface to be sanded so that the sanding

paper uniformly contacts the surface, as shown in

Fig. 4. DO NOT apply excessive pressure to the sander

while sanding. Excessive-pressure may cause

overload of the motor, reduced service life of the

sanding paper, and lowered sanding or polishing

efficiency.

3. How to move the random orbit sander

Move the sander by either moving it up and down

or by moving it in circles while gradually progress-

ing in a sideways direction (Figs. 5 and 6).

4. After installing new sanding paper

Movement of the sander may tend to become

unsteady after new sanding paper has been installed,

because of the new, coarse grain of the paper. This

can be avoided by slightly tilting the sander forward

or backward during sanding or polishing. Sander

movement will become steady as the sanding paper

surface becomes properly abraded.

MOUNTING THE OPTIONAL ACCESSORIES

⅜ Mounting the polyester buff

Since the attachment is a hook-and-loop type as

with the sanding paper, the polyester buff can be

mounted by just pressing it onto the pad (Fig. 7).

MAINTENANCE AND INSPECTION

1. Empting and cleaning the Dust Bag

If the dust bag contains too much saw dust, dust

collection will be affected. Empty the dust bag when

it gets full.

Remove the dust bag, open the fastener, and dispose

of the contents.

2. Inspecting the sanding paper

Since use of worn-out sanding paper will degrade

efficiency and cause possible damage to the pad,

replace the sanding paper as soon a excessive

abrasion is noted.

3. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure

that they are properly tightened. Should any of the

screws be loose, retighten them immediately. Failure

to do so could result in serious hazard.

4. Maintenance of the motor

The motor unit winding is the very “heart” of the

power tool.

Exercise due care to ensure the winding does not

become damaged and/or wet with oil or water.

5. Servicing

Consult an authorized Service Agent in the event of

power tool failure.

6. Service parts list

A: Item No.

B: Code No.

C: No. Used

D: Remarks

CAUTION

Repair, modification and inspection of Hitachi Power

Tools must be carried out by a Hitachi Authorized

Service Center.

This Parts List will be helpful if presented with the

tool to the Hitachi Authorized Service Center when

requesting repair or other maintenance.

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

By adjusting the dial, match the speed to the material and type of work.

Material

Grain

Dial scale

Rough grinding Fine grinding

Paintwork:

Sanding 180 400 3 – 6

Repairs

(scratches, rust spots) 120 240 2 – 4

Stripping 40 80 2 – 4

Wood:

Softwood 60 – 80 240 3 – 6

Hardwood 60 180 3 – 5

Veneers 240 320 2 – 4

Metals:

Aluminium 80 240 2 – 4

Steel 60 240 3 – 6

Stainless steel 120 240 3 – 6

Note: Please use this table as a standard.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi SV 13 YA Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi SV 13 YA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info