Bedienungsanleitung Hitachi UC18YG (Seite 6 von 45) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

571373

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

English

Model UC18YG

Charging voltage 7.2 – 18 V

Weight 0.3 kg

SPECIFICATION

CHARGER

APPLICATION

For charging the HITACHI BATTERY.

⅜ EB712S, EB7S, FEB7S, EB714S, EB7B, EB9S, EB912S,

FEB9S, EB914S, EB914, EB9B, EB924, EB1212S,

EB12S, FEB12S, EB1214L, EB1214S, EB12B,

EB1220BL, EB1224, EB1412S, EB1414, EB1414S,

EB14B, EB1424, EB1812S, EB1814SL, EB1820,

EB1820L, EB1824L

CHARGING

Before using the power tool, charge the battery as

follows.

1. Connect the charger power cord to the receptacle

2. Insert the battery in the charger

Position the battery so that the nameplate faces

toward the nameplate of the charger and press in

the battery until it comes into contact with the

bottom plate (See Fig. 1).

Inserting the battery will turn on the charger (the

pilot lamp lights up).

CAUTION

If the pilot lamp does not light up, pull out the

power cord from the receptacle and check the

battery mounting condition.

The pilot lamp goes off to indicate that the battery

is fully charged.

CAUTION

If the battery is heated due to direct sunlight,

etc., just after operation, the charger pilot lamp

may not light. At that time cool the battery first,

then start charging.

⅜ Regarding recharging time

Table 1 shows the recharging time required

according to the type of battery.

Table 1 Recharging time (approx. min.) at 20°C

NOTE: The recharging time may vary according to the ambient temperature and the power supply voltage.

Battery

voltage

(V)

Battery capacity (Ah)

1.2 – 1.4 Ah 2.0 Ah 2.4 Ah

7.2 V

EB712S, EB7S, FEB7S,

EB7B — —

EB714S

9.6 V

EB912S, EB9S, FEB9S,

EB9B EB924

EB914, EB914S

EB1212S, EB12S,

12 V FEB12S, EB1214L, 30 min. EB12B, EB1220BL 50 min. EB1224

EB1214S 60 min.

14.4 V

EB1412S, EB1414,

EB14B EB1424

EB1414S

18 V EB1812S, EB1814SL EB1820, EB1820L EB1824L

3. Disconnect the charger’s power cord from the

receptacle

4. Hold the charger firmly and pull out the battery

NOTE

Be sure to pull out the battery from the charger

after use, and then keep it.

Regarding electric discharge in case of new batteries,

etc.

As the internal chemical substance of new batteries

and batteries that have not been used for an

extended period is not activated, the electric

discharge might be low when using them the first

and second time. This is a temporary phenomenon,

and normal time required for recharging will be

restored by recharging the batteries 2-3 times.

How to make the batteries perform longer.

(1) Recharge the batteries before they become

completely exhausted.

When you feel that the power of the tool becomes

weaker, stop using the tool and recharge its battery.

If you continue to use the tool and exhaust the

electric current, the battery may be damaged and

its life will become shorter.

(2) Avoid recharging at high temperatures.

A rechargeable battery will be hot immediately after

use. If such a battery is recharged immediately after

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi UC18YG Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info