Bedienungsanleitung Hitachi UR18DSL2 (Seite 10 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

571427

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

English

USING THE TIMER FUNCTION

○ The radio turns on/oﬀ at the preset time

○ Use the radio as an alarm clock

● Sleep Timer

Setting the sleep timer turns the radio oﬀ after the set time

has elapsed.

1. Pressing the sleep timer / clock button while the

power is turned on displays the

SLEEP

indicator.

The time (minutes) indicator changes in order of

[90→80→70→...→10→OFF] in 10-minute units each time

the button is pressed.

2. Press the button repeatedly until the desired time is

displayed.

3. The radio turns oﬀ when the set time has elapsed.

4. To cancel the timer, press the sleep timer / clock button

until the indicator is set to OFF.

The

SLEEP

indicator goes oﬀ and the sleep timer is

cancelled.

To check the remaining time

The

SLEEP

indicator is displayed when the sleep timer

has been set.

Press the sleep timer / clock button to check the remaining

time on the timer.

● Buzzer Alarm / Radio Alarm

NOTE

○ The volume of the buzzer alarm cannot be adjusted.

○ If the rechargeable battery is running low, the radio alarm

timer may not work.

Charge the battery before setting the timer or use the AC

adapter.

○ The radio alarm turns on in the station and at the volume

selected before the timer was set. Set the volume and

time to avoid creating a disturbance when the radio turns

on.

When the alarm time is set and the buzzer alarm is selected,

the buzzer sounds at the preset time.

When the radio alarm is selected, the radio turns on in the

selected radio station at the preset time.

1. Set the time with the radio turned oﬀ .

2. Press and hold the FM mode / alarm button for more than

2 seconds to switch to alarm mode.

The

ALARM

indicator is displayed.

3. The “hour” indicator blinks. Turn the select dial or press

the search button to select the desired “hour”.

Press the FM mode / alarm button to set the “hour”. The

“minutes” indicator blinks. Turn the select dial or press

the search button to select the desired “minutes”.

4. Press the FM mode / alarm button to save the set time.

The

ALARM

indicator goes oﬀ .

5. The display changes in order of [buzzer alarm→radio

alarm→no display] each time the FM mode / alarm button

is pressed.

6. The power turns on and the buzzer sounds or the radio

plays when the preset time is reached.

Buzzer Alarm

To turn oﬀ the buzzer alarm, press the FM mode / alarm

button. If it is not turned oﬀ , the buzzer will continue to sound

for 1 minute and then stop.

Radio Alarm

To turn oﬀ the radio, press the power button. If it is not turned

oﬀ , the radio will continue to play for 30 minutes.

To check the alarm

To check the time set on the alarm, press the band selector

button with the power turned oﬀ .

LISTENING TO THE PORTABLE MUSIC PLAYER

● Connecting an External Device

You can use the radio to listen to a portable music player as

MP3 player, smartphone, etc.

CAUTION

○ Reduce the volume before switching on the power.

Sudden loud volume output may result in damage to the

speakers or cause hearing loss.

○ Do not store external devices in the storage case

in environments subject to direct sunlight or high

temperatures. Failure to observe this may result in

damage to the equipment.

○ Check the inside of the storage case for sand and

other foreign matter before storing external devices in

it, and clean out any foreign matter that exists. Failure

to observe this may result in the equipment becoming

scratched or otherwise damaged.

NOTE

Certain models of smartphones will not emit call tones

from their speakers when connected to the radio.

Check whether your smartphone emits call tones via the

speakers prior to use.

1. With the radio and the external device both turned oﬀ ,

connect the audio cord (ø3.5 mm, available at an electric

store) of the external device to the AUX input terminal

on the inside of the external device storage case on the

radio. (Fig. 8)

NOTE

There are two types of connection cable available:

straight cables and L-shaped cables. Use L-shaped

cables when connecting and storing large-scale external

devices. (Fig. 9)

2. Turn on the radio and press the band select button to

display [AUX].

NOTE

The display changes in the order of [FM→AM→AUX→FM]

each time the band select button is pressed.

3. Turn on the external device to start listening.

4. Adjust the volume.

NOTE

Volume may not increase if the peripheral equipment’s

volume output level is low.

5. Store portable audio players inside the external device

storage box.

(1) Fix the belt in place. (Fig. 10)

(2) Protect it with the cushioning sheet. (Fig. 11)

There are cases in which the cushioning sheet will

not be able to protect external devices depending on

their thickness.

In this event, ﬁ x them in place with the belt as

explained in (1).

6. To disconnect the external device, turn oﬀ the device and

the radio before removing the audio cord.

OTHER FUNCTIONS

● Using Headphones

You can use headphones or earphones purchased from an

electric store to listen to the radio.

CAUTION

Be sure to turn the volume down before connecting the

headphones or earphones.

Failure to do so may result in sudden loud noise and

cause hearing impairment.

01Eng_UR18DSL2_WE.indd 1001Eng_UR18DSL2_WE.indd 10 2013/06/20 16:27:502013/06/20 16:27:50

Hitachi UR18DSL2 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info