Bedienungsanleitung Hitachi wr 12 daf2 (Seite 7 von 94) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

381580

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

English

GENERAL OPERATIONAL PRECAUTIONS

WARNING! When using battery operated tools, basic

safety precautions should always be followed to reduce

the risk of fire, leaking batteries and personal injury,

including the following.

Read all these instructions before operating this product

and save these instructions.

For safe operations:

1. Keep work area clean. Cluttered areas and benches

invite injuries.

2. Consider work area environment. Do not expose

tools to rain. Do not use tools in damp or wet

locations. Keep work area well lit.

Do not use tools where there is risk to cause fire

or explosion.

3. Keep children away. Do not let visitors touch the

tool. All visitors should be kept away from work

area.

4. Store batteries or idle tools. When not in use,

tools and batteries should be stored separately in

a dry, high or locked up place, out of reach of

children.

Ensure that battery terminals cannot be shorted

by other metal parts such as screws nails etc.

5. Do not force the tool. It will do the job better and

safer at the rate for which it was intended.

6. Use the right tool. Do not force small tools or

attachments to do the job of a heavy duty tool.

Do not use tools for purposes not intended.

7. Dress properly. Do not wear loose clothing or

jewellery, they can be caught in moving parts.

Rubber gloves and non-skid footwear are

recommended when working outdoors. Wear

protecting hair covering to contain long hair.

8. Use safety glasses. Also use face or dust mask

if the cutting operation is dusty.

9. Connect dust extraction equipment.

If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used.

10. Do not abuse the cord (if fitted). Never carry the

tool by the cord or yank it to disconnect it from

the socket. Keep the cord away from heat, oil and

sharp edges.

11. Secure work. Use clamps or a vice to hold the

work. It is safer than using your hand and it frees

both hands to operate the tool.

12. Do not overreach. Keep proper footing and balance

at all times.

13. Maintain tools with care. Keep cutting tools sharp

and clean for better and safer performance. Follow

instructions for lubrication and changing

accessories. Inspect tool cords periodically and if

damaged, have it repaired by authorized service

facility. Keep handles dry, clean, and free from oil

and grease.

14. Disconnect tools. Where the designs permits,

disconnect the tool from its battery pack, when

not in use, before servicing, and when changing

accessories such as blades, bits and cutters.

15. Remove adjusting keys and wrenches. Form the

habit of checking to see that keys and adjusting

wrenches are removed from the tool before turning

it on.

16. Avoid unintentional starting. Do not carry the tool

with a finger on the switch.

17. Stay alert. Watch what you are doing. Use common

sense. Do not operate the tool when you are tired.

18. Check damaged parts. Before further use of the

tool, a guard or other part that is damaged should

be carefully checked to determine that it will

operate properly and perform its intended function.

Check for alignment of moving parts, free running

of moving parts, breakage of parts, mounting and

any other conditions that may affect its operation.

A guard or other part that is damaged should be

properly repaired or replaced by an authorized

service center unless otherwise indicated in this

handling instructions. Have defective switches

replaced by an authorized service facility. Do not

use the tool if the switch does not turn it on and

off.

19. Warning

⅜ The use of any accessory or attachment, other

than those recommended in this handling instruc-

tions, may present a risk of personal injury.

⅜ Ensure that the battery pack is correct for the tool.

⅜ Ensure that the outside surface of battery pack or

tool is clean and dry before plugging into charger.

⅜ Ensure that batteries are charged using the correct

charger recommended by the manufacturer. In-

correct use may result in a risk of electric shock,

overheating or leakage of corrosive liquid from

the battery.

20. Have your tool repaired by a qualified person.

This tool is in accordance with the relevant safety

requirements. Repairs should only be carried out

by qualified persons using original spare parts,

otherwise this may result in considerable danger

to the user.

21. Disposal of battery

Ensure battery is disposed of safely as instructed

by the manufacturer.

22. If under abusive conditions, liquid is ejected from

the battery, avoid contact

If this accidentally occurs, frush with water. If

liquid contacts eyes additionally, seek medical

help.

PRECAUTIONS FOR CORDLESS IMPACT

DRIVER

1. This is portable tool for tightening and loosenig

screws. Use it only for these operation.

2. Use the earplugs if using for a long time.

3. One-hand operation is extremely dangerous; hold

the unit firmly with both hands when operating.

4. After installing the driver bit, pull lightly out the

bit to make sure that it does not come loose. If

the bit is not installed properly, it can come loose

during use, which can be dangerous.

5. Use the bit that matches the screw.

6. Tightening a screw with the impact driver at an

angle to that screw can damage the head of the

screw and the proper force will not be transmitted

to the screw. Tighten with this impact driver lined

up straight with the screw.

7. Always charge the battery at a temperature of 0

– 40°C.

A temperature of less than 0°C will result in over

charging which is dangerous. The battery cannot

be charged at a temperature greater than 40°C.

The most suitable temperature for charging is that

of 20 – 25°C.

8. Do not use the charger continuously.

When one charging is completed, leave the charger

for about 15 minutes before the next charging of

battery.

9. Do not allow foreign matter to enter the hole for

connecting the rechargeable battery.

10. Never disassemble the rechargeable battery and

charger.

11. Never short-circuit the rechargeable battery.

Short-circuiting the battery will cause a great

electric current and overheat. It results in burn or

damage to the battery.

Hitachi wr 12 daf2 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info