Bedienungsanleitung Hitachi WR16SE (Seite 3 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

572176

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

English

IMPACT WRENCH SAFETY

WARNINGS

○ Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring or its own cord.

Fasteners contacting a “live” wire may make exposed

metal parts of the power tool “live” and could give the

operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. When using the tool at a hight, make sure that there is

nobody below.

2. Use earplugs if using for a long time use.

Switch the reversing switch only after the motor has stoped

when it is necessary to change the direction of the rotation.

4. Use a step up transformer when a long extension cable

is used.

5. Conﬁ rm the tightening torque by a torque wrench before

use in order to assertain the correct tightening torque to

be used.

6. Assemble the socket securely to the impact wrench with

the socket pin and ring.

7. Conﬁ rm whether the socket has any cracks in it.

8. Always hold the body and handle of the impact wrench

ﬁ rmly. Otherwise the counterforce produced may result

in inaccurate and even dangerous operation.

SYMBOLS

WARNING

The following show symbols used for the machine. Be

sure that you understand their meaning before use.

WR16SE : Impact Wrench

Read all safety warnings and all instructions.

Only for EU countries

Do not dispose of electric tools together with

household waste material!

In observance of European Directive 2002/96/EC

on waste electrical and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility.

Switching ON

Switching OFF

Clockwise rotation

Counterclockwise rotation

Mode switch

Mode Indicator Lamp

Disconnect mains plug from electrical outlet

Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1), the package contains

the accessories listed in the below.

○ Case ...........................................................................1

○ Hook ...........................................................................1

Standard accessories are subject to change without notice.

APPLICATIONS

○ Tightening and loosing various kinds of bolt and nut.

SPECIFICATIONS

Voltage (by areas)* (110V, 120V, 230V, 240V)

Power input* 370 W

No load speed / Impact

rate (A,B,C,D mode are

shown in Fig.3)

A : 1100 / 1300 min

-1

B : 1300 / 1500 min

-1

C : 1400 / 1700 min

-1

D : 1600 / 1900 min

-1

Capacities (size of

bolts)

M12 - M16 (High tension bolt)

M12 - M22 (Ordinary bolt)

Tightening torque** Maximum 360 N·m

Weight*** 2.5 kg

* Be sure to check the nameplate on product as it is

subject to change by areas.

Tightening the bolt without extension cord at rated voltage.

*** Weight: According to EPTA-Procedure 01/2003

NOTE

Due to HITACHI’s continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

MOUNTING AND OPERATION

CAUTION

To prevent accidents, make sure to turn the switch oﬀ

and disconnect the plug from the receptacle.

Action Figure Page

Mounting the socket (1) 1 90

Changing the impact rate 2 90

Changing the rotation direction 3 90

Dismounting the hook (5) 4 90

Selecting accessories ― 91

1. Switch operation (Fig. 3)

The switch (4) in this machine functions as a motor

switch and rotational direction selector switch. When

the switch is set to R indicated on the handle cover, the

motor rotates clockwise to tighten the bolt.

When the switch is set to L, the motor rotates

counterclockwise to loosen the bolt. When the switch is

released, the motor stops.

2. Switching tightening mode (see Fig. 2)

Each press of mode switch (2) will change the impact

rate. Switch (4) (see Fig. 3) must be switched OFF when

conducting this operation. Use A or B for light tasks, and

C or D for heavy tasks.

3. The protection function

To protect the tool, the protection function will be

activated, automatically shutting down the unit in the

event of any problems. (Table 1)

0000Book_WR16SE.indb 30000Book_WR16SE.indb 3 2014/08/20 11:29:082014/08/20 11:29:08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi WR16SE Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info