Bedienungsanleitung Hobby PRESTIGE 2016 (Seite 77 von 148) (Englisch)

623059

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

7. Installation of electrical devices

Operation via auxiliary battery*

(self-sucient package)

Operating and loading the auxiliary battery*

Ifthecaravanisnotconnectedtothe230Vmainssupply,theauxi-

liarybatterywillsupplytheelectricalsystemwith12VDCvoltage.

Since the battery only has a limited capacity, the electrical devices

should not be operated for a longer period of time without charging

thebatteryorconnectingthecaravantothe230Vmainsconnection.

The charge controller is used to charge the battery. There are three

possiblesourcesofinput:(230Vmainsconnection,generatorinthe

basevehicleorsolar panel*, if applicable)wherebythe sourceof

input with the highest input voltage supplies the charge current for

the connected battery.

• Only accumulator batteries with bound electrolytes

(gelorAGMbatteries)maybeinstalledinthosepo-

sitionsspeciedbythemanufacturer.

•Theinstalledbatterymaynotbeopened.

• Whenchangingauxiliarybatteries,useonlybatteries

of the same make and capacity.

(Setting the battery type on the control panel:

see p. 60)

•Beforedisconnectingorconnectingtheauxiliary

battery, disconnect the electric connection to the

basevehicleandswitchothe230Vsupply,the12

Vsupplyaswellasallelectricaldevices.

• Beforereplacingfusesyoumustrst de-energise

the charge controller.

• Beforereplacingablownfuseyoumustrstx

whatever caused the fuse to blow.

• Fusesmayonlybereplacedbyfuseswiththesame

fuse protection value.

• Airingthechargecontrollerinsucientlywillcausea

reduction of the charge current.

•Thesurfaceofthechargecontrollercasingmaybe-

come hot when the device is in operation.

AnIntelligentBatterySensor(IBS)hasbeenconnectedtothebattery

terminal. It monitors the actual current and the actual voltage in a

highly precise manner.

It is possible to precisely predetermine the operating time of the

battery based on the actual consumption. The IBS ensures that the

battery will be changed in good time and assists in providing active

energy management so that the performance requirements of the

dierentelectricaldevicescanbecoordinatedwiththechargingof

the battery.

The charge state of the battery, age or remaining time until discharge

are all shown on the TFT display of the control panel. Charging is

carried out gently in accordance with the steady-state principle by

an"intelligent"charger.

Charge controller in clothes cupboard on wall

Auxiliary battery

Intelligent Battery Sensor (IBS)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hobby PRESTIGE 2016 Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hobby PRESTIGE 2016

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info