- 6 - HOBOT Technology Inc.
How to remove the device from glass:
(1) While device is running, hold the safety rope with one hand and take device
down from glass with the other hand.
(2) Remove the device to a safe area, then turn it off.
Safety rope and buckle:
(1) Before using, check to see if the safety rope is broken or if the knot is loose.
(2) Fasten the safety rope and tie to an indoor fixture before operating.
UPS (Uninterrupted Power System) function:
(1) The UPS function will be enabled automatically when no electric power is
supplied. The backup time of this UPS is 20 minutes.
(2) If no electric power is supplied, the device will stop automatically, sound an
alert, and flash a red light. The user should take the device down from the glass
as soon as possible.
(3) The safety rope can be used to pull the device back. Gently pull the safety rope
at an angle close to the glass to prevent it from falling off.
Make sure the battery is fully charged (green light ON) before use:
(1) First, turn off the power switch on the device. Plug it into a power source.
Orange light ON means charging.
(2) Green light ON means the battery is fully charged.
Other things to pay attention to:
(1) Do not use on frameless glass.
(2) Make sure to put the cleaning ring onto the cleaning wheel correctly to avoid
leakage.
(3) Do not use it on rainy or humid days.
(4) For windows with no balcony, a warning area must be established on the
ground below to prevent people from coming near it.
