4 layer filter, by means of
1 double layer dust bag
2 single layer pre-motor filters
3 single layer post-motor filters
Make sure that the stick out is in the right position and put the hose in the dust bag until it clicks.
Pull up the stick out and pull the hose out of the dust bag compartment.
To remove, push the stick out and pull out the hose.
1 Put all components together.
2 Make sure that the dust bag and filter are correctly installed (this is done standard at the fabric).
3 Pull out the main lead and put it in a plug socket.
4 Press the start-button: you can start cleaning.
5 If you finished cleaning, turn off the unit.
6 Pull out the main lead from the plug socket.
7 Press the winding-button, to automatically wind up the cord.
8 Put the unit up straight.
9 Slide the support of the vacuum mouth in de holder (at the underside of the unit).
1 Don’t put the plug in the socket if the unit is turned ON, this to avoid possible damage.
2 The winding up of the cord will go fast. Keep children away from this and remove obstacles that are in the
neighbourhood.
3 If you use the vacuum cleaner, always be aware of the risks at shocks because of water and damage at the
unit.
1 As soon as the dust bag-full indication lights up, you have to check if the dust bag is indeed full and if it
has to be replaced, or if the air run through is blocked.
2 To get a good clean result it’s important that the dust bag will be replaced once in a while.
3 Make sure that the unit is turned off and the plug is out of the socket.
4 Push the cap unlocking-button and open the cover of the dust bag compartment.
5 Remove the dust bag from the dust bag holder.
6 Gently remove the dust bag from the compartment.
7 Check the motor-filter and clean or replace this, if necessary.
8 Install the new dust bag. Push the dust bag down very gently until the opening of the dust bag is at the
same height as the opening of the compartment.
9 Push the back of the dust bag in the compartment.
10 Close the compartment.
CHANGING THE DUSTBAG
WARNING
OPERATION
UNCOUPLE THE VACUUMHOSE
COFIRMING THE VACUUMHOSE
FILTERS
