10/25
3.
CONFIGURING HOLUX TRACKER
Holux provides a way (TrackerUser.exe) for end users to configure their tracker. Users can
easily modify some of the simple settings for their devices, however if users want to modify
some settings which are provided by this utility, please contact you distributor for help.
The TrackerUser.exe is the user utility which enables users to fast configure Holux trackers.
In this chapter, you will be guided through the process to set the phone numbers to receive
tracking report, tracking interval, reporting interval, and editing messages. Periodical
tracking mode can be enabled to make device getting position fix and report to server at
preset interval.
Tracker007 allows users receive location data by mobile phone, which means users must
get a set of Google key to setup the tracker. Please refer to Chapter 3.5 for the steps.
Please note this utility supports only Windows OS. Linux or Mac OS are not supported at
this point.
Note: Make sure the tracker is powered on prior to it is plugged into your computer
for configuration. Then use the included USB cable to connect the tracker with your
computer to configure the tracker.
