Bedienungsanleitung Home Easy HE220 (Seite 2 von 2) (Englisch)

558672

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

C H Byron

34, Sherwood Rd

Aston Fields

Bromsgrove

B60 3DR

Contact Details:

433MHz

R&TTE

APPROVED

CH Byron Electrical United Kingdom. www.chbyron.com

DK

FIN

IRL

EST

SLO

0560

Tel: 0845 2301231

Fax: 01527 550001

Web: www.chbyron.com

E-mail:

support@chbyron.com

Help: Occasionally interference from receiver sockets plugged into adjacent wall

sockets or when used with transformers (low voltage products) can affect the

operating range.

Try placing one of the receiver sockets in another wall socket. For low voltage

products, place the transformer as far away form the receiver socket as possible.

Contact:   Helpline: 0845 2301 231

TIMBER

CONCRETE

METAL

GLASS

PLASTICS

RF Range: The radio signals operating distance is reduced when the signal has

to pass through walls. The radio signals achieve a range of 30m inside a building;

this can be reduced depending on the type of material

10 - 15%

BRICK

10 - 40%

40- 80%

10 - 40%

90%

5 - 15%

Range

Reduction Guide:

Switching On/Off :

1. Select the unit by

pressing the "unit"

button until the

correct number is

displayed on the

screen.

2. Press the "On"

button, the receiver

socket will switch on.

Never exceed 300W

maximum load.

3. Press the "Off" button to switch the receiver unit off.

Setting Clock

The remote control displays the time in a 24hr format, to set the time.

1. Press and hold the

clock button for +3sec.

The hrs will now start

to flash

2. Use the

buttons to select

the hours and

press Enter.

3. The minutes will now start to flash, set using the up and

down arrows to select the minutes and then press enter.

Setting Timer :

The HE-200 remote control timer can store up to 12 different timer

programs, ideal for switching on lights throughout the home for added

security.

To program the remote control:

1. Press and hold the "Timer" button for 3 seconds, the

display will show the 12 available memory spaces. Use

the arrows keys to select a memory space, the display

will also show any programmed times already saved.

Press "Enter" to select the program space.

2. Select the required unit from using the "Up/Down"

arrows e.g. if the socket to be programmed is

programmed to unit code 2, select unit 2 on the display

and press "Enter". Only one unit code can be selected

per program.

3. The start or On time will start to flash, use the arrow keys to select the hours

and press enter to select the min.

Now select the finish or off time.

4. Finally select the program mode using the arrows keys and press enter to

confirm.

Daily Timer Setting: Activates the program daily

Security Setting: Selecting the security mode will switch the

receiver units "On/Off" randomly through out the set time.

 On = between 40Min - 2Hrs

 Off = between 40Min - 3Hrs

Single Timer: Activates the program for a single time only.

Help Section :

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Home Easy HE220 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info