Bedienungsanleitung Hotpoint SGC10AA0 (Seite 11 von 16) (Englisch)

665368

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

1111

steam quantity needed to iron your garments.

To start the Eco function set the steam control (16) to

Eco ( ). When the Steam Ready indicator light (20)

turns on, you can start steam ironing.

Automatic switch-off function (I)

The automatic switch-off function ensures total safety.

This function automatically switches off the steam

generator when it is not used for a few minutes. In

particular, your Power Perfection will automatically

switch off after 11 minutes if it is left unused in the

ironing position, on one side or in a vertical position.

If you leave the steam generator unattended, a buzzer

will sound to inform you that the automatic switch-off

function is active. To restart it, just press the ON/OFF

button.

Wait for the Steam Ready indicator light to

turn on again and for the temperature

indicator light to turn off before start ironing

again.

CLEANING AND MAINTENANCE

After use (J)

1. Disconnect the appliance plug from the electrical

socket and let the steam generator cool down.

2. Empty the water reservoir (8).

3. Place the iron into its housing, making sure that

itstiptsintothe special groove and closethe

iron locking lid (11) using the special iron locking

button (12).

4. Wind the steam cable (13) and the power-supply

cord (10) around the special cord-rewinding clip

(9).

5. Store the steam generator in a safe dry place.

6. Let the steam generator cool down and store it in

a safe dry place.

You cannot use the handle to carry the iron

when it is locked in its special housing. To

carry the iron, rst make sure the locking device

is in place ( closed lock) and the iron is locked in

its special housing. Then lift the iron by holding

its boiler base.

Cleaning (K)

Never use aggressive and/or abrasive

products to clean the plastic parts and the

iron soleplate.

1. Disconnect the appliance plug from the electrical

socket and let the steam generator cool down.

2. Clean the plastic parts of the steam generator

with a soft damp cloth and dry.

3. For routine cleaning and/or the removal of stains

or other residues deposited on the plate, use a

damp soft cloth and dry.

4. Use a damp cotton tip to remove any scale in the

steam holes that may impair the performance of

your steam generator.

In order to keep the soleplate perfectly

smooth and polished, avoid any contact

with metal objects and do not iron sharp objects

such as buttons, studs and hinges - they may

scratch the plate.

5. Tocleanthe Pure Water lter (22),removethe

water reservoir and slide out the Pure Water

lter.Washthelterunderrunningwater,taking

care that the jet of water is not too strong, and

then re-place it.

6. Regularly rinse the water reservoir (8) under

clean water. After cleaning, always empty the

water reservoir.

Scale removal (L)

If your steam generator is not equipped with the

descaling system Calc Proof, clean the vaporisation

chamber to remove any residual calcareous salts.

We recommend cleaning it every time the descaling

button (19) lights up. Follow the procedure below.

The descaling system Calc proof does not

purify water from impurities other than

limescale. We recommend to check that mains

water is not contaminated by these impurities

that could affect the performance of the Power

Perfection. Water may drip out of the soleplate

and can compromise the ironing quality.

If you wish to clean it after using the Power

Perfection, wait at least 3 hours until the

steam generator has completely cooled down.

1. Make sure the appliance is disconnected from

the electrical socket.

Clean it near a sink and away from fabrics

so that they don't get stained.

2. Remove the water reservoir (8) and place the

steamgeneratoronasteadyatsurface.

3. Turn the steam generator upside down. Unscrew

the protection plastic lid (7) and the boiler closing

cap (7a) using an Allen spanner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint SGC10AA0 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info