Bedienungsanleitung Hotpoint SGDC11AA1 (Seite 9 von 16) (Englisch)

665369

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

USING YOUR IRON

Temperature selection and steam

adjustment (B)

If your Power Perfection is equipped with the Optimal

Soleplate Temperature technology, you need not

adjust the temperature.

1. Connect the plug of the appliance to a grounded

socket (220/240V).

2. Press the ON button (18) - it will light up to show

that the steam generator is ON.

3. Wait until the temperature indicator light turns off

before starting ironing.

4. Select the appropriate steam setting by means

of the steam control (16) or set it to the Min

position to iron without steam. As soon as the

selected steam quantity is available, the Steam

Ready indicator light (20) will turn on.

5. You can iron all the types of fabrics that can be

ironed in any order.

In the version with no Optimal Soleplate Temperature

technology, follow the instructions below.

1. Connect the plug of the appliance to a grounded

socket (220/240V).

2. Press the ON button (18) - it will light up to show

that the steam generator is ON.

3. Use the temperature control (21) to select the

desired temperature. Every time you rotate the

temperature control, the temperature indicator

light (2) turns on to show that the temperature

is changing.

4. When the iron reaches the set temperature, the

temperature indicator light turns off to show that

the iron is ready for use.

5. Check the type of fabric on the garment label. If

you don't know the type of fabric, we recommend

ironing a hidden part in order to determine

the most appropriate temperature and avoid

damaging the fabric. Silk, wood and synthetic

fabrics: iron the garment inside out to prevent

any shiny marks. Start with the garments that

require a low temperature, e.g. synthetic fabrics.

6. Select the appropriate steam setting by means

of the steam control (16) or set it to the Min

position to iron without steam. As soon as the

selected steam quantity is available, the Steam

Ready indicator light (20) will turn on.

process and in the good operation of the appliance

over a long lifespan. In particular, a high concentration

of limescale may damage some parts of the iron and

cause its early deterioration.

Power Perfection water tank has a capacity of 1000ml

with extra 200ml boiler.

Suitable water

Although the Power Perfection steam generator can

be used with tap water, if the water is very hard (as

measured in French degrees), we recommend mixing

tap water and demineralised water according to the

following table.

Hardness

degree [°f]

Proportion

[tap water:demineralised water]

7°f 1:0

7°f - 14°f 1:0,5

14°f - 22°f 1:1

22°f - 32°f 1:2

32°f - 54°f 1:3

>54°f 0:1

To determine the hardness degree of the water in

your area, contact your local water board or body.

This data is sometimes available on the board/body's

website too.

Filling the water reservoir (A)

Before every use and every time the no-water

indicatorlightturnson,llthewaterreservoir:

1. Use the special handle to remove the water

reservoir (8).

2. When lling the reservoir, make sure the

maximum level shown on the reservoir is not

exceeded.

3. Re-place the water reservoir in the relevant

housing until it clicks into place.

4. Repeat the operation every time the water-level

indicator light (17) turns on.

5. Press the On / Off button to restart ironing after

llingthewatertank.

Never add any perfume, vinegar, starch,

scale-removing agents, ironing products or

other chemicals in the water reservoir - unless

recommended by Hotpoint. Never use

contaminated water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint SGDC11AA1 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info