Bedienungsanleitung Hotpoint SIDC30BA1 (Seite 12 von 16) (Englisch)

665364

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

1212

Cleaning (J)

Never use aggressive and/or abrasive

substances to clean the plastic parts and

the iron soleplate.

1. Set the steam regulator (3) to Off, disconnect the

appliance plug from the electrical socket and let

the iron cool down.

2. Use a dry or slightly dampened soft cloth to

clean the upper part of the iron.

3. For the ordinary cleaning and/or removal of

stains or other residues deposited on the plate,

clean with a dampened soft cloth and dry.

4. Use a dampened cotton tip to eliminate scale in

the steam holes that may impair the performance

of your iron.

In order to keep the soleplate perfectly

smooth and polished, avoid contacts with

metal objects, do not iron sharp objects, such as

buttons, studs and hinges in order to avoid

scratching the plate.

5. Regularly rinse the reservoir with clean water.

After cleaning, always empty the water reservoir.

Auto-Clean Function (K

)

LCD

If you have been using water from the tap, we

recommend starting the Auto-Clean function after

ironing every time.

The use of the Auto-Clean function should

not be deemed the same as using deminera-

lised water on a regular basis.

1. Check that the appliance is disconnected from

the electrical socket and the steam regulator is

(3) set to Off.

2. Fill the water reservoir (9) up to the maximum

water level (10).

Never add any perfume, vinegar, starch,

scale-removing agents, ironing products or

other chemicals in the water reservoir - unless

recommended by Hotpoint. Never use

contaminated water.

3. Connect the plug of the appliance into a

grounded socket (220/240V).

4. Set the temperature to the maximum value with

the temperature buttons +/- (4a).

5. Wait at least 2 or 3 minutes to warm the iron

completely.

6. Holding the iron above the sink or a container

made of resistant material, press the Auto-Clean

button (8) and shake gently.

Steam and boiling water will come out of the

soleplate with scale residues and other

impurities. Never use plastic containers for

collection.

7. Switch off the iron and disconnect it from the

electrical socket.

8. Set the steam select to the maximum position.

9. Allow water to come out of the holes for at least

30 minutes.

10. Slide the iron gently on a cloth to eliminate any

stains from the soleplate.

11. Before using the iron again, press the shot of

steam button (1) repeatedly to eliminate any

scale residues.

When making this operation, keep the iron

away from the garments in order not to

stain them.