Bedienungsanleitung Homedics BPA-300 (Seite 3 von 39) (Englisch)

518341

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

How to use the blood pressure device

Setting date and time

1. To set date and time, press the SET button located on the back of the blood

pressure device.

2. The number designating hours flashes on the display. The time setting is changed by pressing

the button. Every push increases the number by one and when the desired number

appears on the display it is confirmed by pressing the SET button . The number

designating minutes now flashes on the display.

3. The settings for minutes and date are set in the same way as described in 2.

4. When the device is ready for measurement, ‘0’ will appear on the display.

Fitting the cuff

Correct cuff size is critical to accurate measurement. This monitor comes with two sizes of arm

cuff: Standard size fits 24-36cm (9.5”-14.2”), large size fits 34-46cm (13.4”-18.1”).

1. If the cuff is not assembled at first use, put the end of the cuff which is furthest away from the

tube through the D-ring to form a noose.

2. Apply the tube to the left side of the device.

3. Remove tight-fitting clothing from your left upper arm and position the cuff at approximately

2-3 cm above the elbow so that the tube is centered at the middle of the arm. The tube must

face downward towards the hand.

How to use the blood pressure monitor

This blood pressure monitor is equipped with ‘DK Technology™’. By pressing a single button the

cuff is automatically inflated to block the blood pressure flow through the artery. Subsequently,

the deflation process starts. The ‘DK Technology™’ enables automatic inflation and deflation to

be adjusted exactly to fit each individual. Please be aware that any motion during inflation or

deflation will cause measurement errors. When the measurement is complete the display will

show the systolic pressure, the diastolic pressure, and the heart rate.

‘DK Technology™’ is approved to provide clinically correct results. The device is approved by

and in accordance with the demands of MDD (Medical Device Directive, European Norm EN-

1060-3 &/or 1060-4) as well as the guidelines from The British Hypertension Society (BHS)

accreditation and the Food & Drug Administration (FDA) AAMI/ANSI SP10.

Based on the measurements, the blood pressure monitor’s category indicator will warn the user

by means of a symbol if the user falls within a risk group. Read more about this in the section

‘Risk category indicator’ and consult the table on page 48.

The blood pressure monitor is also equipped with an identification function for heart arrhythmia

(heart rhythm disturbances) which will warn the user that his or her heart has an unstable

heartbeat. If the symbol

IHB

appears frequently (5 successive measurements or more) it is

highly recommended that you consult a doctor. Read more about this in the section ‘Establishing

arrhythmia (heart rhythm disturbances)’.

Description of the parts

LCD display

User select

button

START/STOP button

Memory button

Air tube and connector

D-ring cone and arm cuff

Date/Time set buttons

(located on back of unit)

(

”

)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Homedics BPA-300 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info