Bedienungsanleitung Homedics GSM-800H (Seite 2 von 2) (Englisch)

690111

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Cool Grey 11c

Cool Grey 10c

White

Pantone 636c

IB-GSM800H-GB-0118-01

FKA Brands Ltd

Somerhill Business Park, Tonbridge, Kent TN11 0GP, UK

Customer Support: +44(0) 1732 378557 | support@homedics.co.uk

PRODUCT FEATURES Unique Gel nodes provide a smooth, natural touch massage

DEMO BUTTON - For a brief demonstration of the features

of the Shiatsu Massaging Cushion, press the Demo button.

The unit will briey go through each function. Once complete,

the unit automatically turns o. The L.E.D. light will blink to

indicate the active functions.

SHIATSU GEL MASSAGE - A deeply relaxing and rejuvenating

experience invented in Japan using rhythmic nger pressure to

stimulate ‘chi’ (vital energy), relieving stress and tension.

SHIATSU PROGRAMS - Choose from 3 preset

programs where the Shiatsu massage travels up and down in

a specic area of the back. To select a program, simply press

the button and the LED will illuminate. To deselect, press the

button again or press another button.

Full back Upper back Lower back

SPOT SHIATSU - While the unit is in Shiatsu massage,

press either button to stop and focus the Shiatsu action in one

place. Once the unit is operating in Spot Shiatsu, you may

adjust the mechanism position by holding down either button

until the desired position is reached. The Up

Arrow will move the mechanism upwards and

the Down Arrow will move it down. Once you

release the button, the mechanism will stop in

that place.

3SPEED SETTING - To change the speed of

the massage mechansim press ‘3 Speed’ button

to change between low, medium and high. The

speed setting selected is shown by the lights

below.

POWER BUTTON q - To turn on the unit, rst

press the POWER button. The LED indicator will

illuminate and conrm your selection. To turn o the unit,

simply press the button again. The LED indicator will blink

while the back massage mechanism returns to its lowest point

and then it will turn o.

VIBRATION MASSAGE - Add invigorating vibration

massage to any shiatsu or rolling massage program.

PERFECT FIT - To customize the massage to your height,

press the “Perfect Fit” button at the highest desired position.

The massage heads will not travel higher than that position for

the duration of the massage. To deselect the Perfect Fit feature,

press the “Perfect Fit” button a second time. The massage will

return to its full travel.

ROLLING MASSAGE - Rolling is like two hands or thumbs

working up and down your back.

ROLLING PROGRAMS - Choose from 3 preset programs

where the Rolling massage travels up and down in a specic

area of the back. To select a program, simply press the button

and the LED will illuminate. To deselect, press

the button again or press another button.

WIDTH ADJUSTMENT - While the unit is

in Rolling massage for the back, press this button

to adjust the distance or width between the

massage heads. With each press, the massage

heads will move to the next available position.

HEAT - For soothing heat when massage

is on, simply press the heat button and the

corresponding red L.E.D. light will illuminate.

To deselect, press the button again and the

corresponding L.E.D. light will turn o.

For your safety, heat cannot be turned

on if massage is not selected.

PLUG: If the plug on this appliance is damaged,

it can be replaced with a BS 1363 plug, tted with

a 3A BS 1362 fuse. The recommended fuse for

this appliance is 3 amp. Care must å taken when

changing the plug. If in doubt, contact a qualied

electrician.

INSTRUCTIONS FOR USE:

IMPORTANT - Preparing the appliance for use

The Shiatsu Massager comes with a screw located on the back of the unit to

protect the massage mechanismduring shipment, which must be removed

before the rst use to allow the shiatsu feature to function. Use the

provided Allen key. Then, properly dispose of the screw.

WARNING – Failure to remove screw may cause permanent

damage to the appliance.

Error: all remote control LEDS ash for a few seconds.

Cause: massager overloaded.

Solution: ensure the allen key bolt/screw has been removed from back of

the massage cushion (using the allen key included). Should the condition

continue after this please contact your HoMedics service centre.

Strapping System

The Gel Shiatsu Massager incorporates a unique strapping system which

allows you to fasten it to almost any chair. Just slip the straps over the seat

or chair and adjust fastening straps to secure. Your massager won’t slip or

slide away.

Note: Do not use this product for more than 15 mins at a time.

The moving dual massage mechanism on the back always “parks” or

nishes in its lowest position. It will continue to this position after the

power has been turned o. If the electrical supply is interrupted, when

power is restored, the mechanism will “park” or move to its lowest position

MAINTENANCE:

Cleaning

Unplug the appliance and allow to cool before cleaning. Clean only with a

soft, slightly damp sponge.

• Never allow water or any other liquids to come into contact with the

appliance.

• Do not immerse in any liquid to clean.

• Never use abrasive cleaners, brushes, glass / furniture polish, paint thinner

etc to clean.

Storage

Place the appliance in its box or in a safe, dry, cool place. Avoid contact

with sharp edges or pointed objects which might cut or puncture the

fabric surface. To avoid breakage, DO NOT wrap the power cord around the

appliance. DO NOT hang the unit by the cord.

Moving Gel Shiatsu

massage mechanism

Homedics GSM-800H Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info