Body Area Comfortable Energy Level
4. The device sets itself on the lowest energy level. Deliver the first pulse, on energy level 1, by pressing the
pulse button. You will see a bright flash, hear a popping noise and you may feel a mild stinging or/and heat
sensation.
5. Remove the applicator from the skin and place it on the next spot of the test area.
6. Use the power button to increase the energy level by 1. The energy level lights will light up blue (or white
for levels 4 and 5) according to the selected energy level. Deliver the second pulse, on energy level 2, by
pressing the trigger button.
7. Only if you feel comfortable repeat steps 5 to 6 until you have reached the maximum energy Level of 5.
Stop the test once you do not feel comfortable, increasing the energy level increases the risk of adverse
effects. If you see adverse effects such as severe redness or blistering stop the test immediately.
8. Wait 48 hours and examine the tested area. If the skin in the test area seems normal (no response or mild
redness) you can proceed with a full treatment in the highest comfortable energy level you tested.
If you see extreme redness, swelling or blistering, even in the low energy level settings do not do the full
treatment in that area.
Note: Do not treat full areas in energy levels you have not tested before.
Do not treat the tested area for at least 1 week after the spot test is done. Use the table below to make a note
of the energy level that suits you for different areas you wish to treat.
6
GB
