Bedienungsanleitung Homedics SBM-300-2 (Seite 3 von 20) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

518438

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

• This appliance should NEVER be used by any individual suffering from any physical ailment

that would limit the user’s capacity to operate the controls or who has sensory deficiencies in

the lower half of their body.

• NEVER use directly on swollen or inflamed areas or skin eruptions.

• If you feel any discomfort whilst using this appliance, discontinue use and consult your doctor.

• This is a non-professional appliance, designed for personal use and intended to provide a

soothing massage to worn muscles. DO NOT use as a substitute for medical attention.

• DO NOT use before going to bed. The massage has a stimulating effect and can delay sleep.

• Do not use for longer than the recommended time.

PRODUCT FEATURES:

INSTRUCTIONS FOR USE:

IMPORTANT - Preparing the appliance for use

1. This massager comes with a screw located on the back of the unit which MUST be removed before the first use to

llow the unit to function properly.

2. Use the allen key provided to remove the screw and place the black plug provided into

he hole left by the screw.

WARNING – Failure to remove screw may cause permanent damage to the appliance.

NOTE: complete steps 1 to 3 before switching the appliance on at the mains.

. Attach the Massage seat to almost any chair using the integrated strap located at the back of the cushion. Ensure it

is held firmly in place by adjusting the strap as necessary.

2. Connect the power supply lead from the adaptor with the corresponding lead in the side of the cushion.

3. Plug the adaptor into a 230V mains outlet.

4. Once seated, use the remote control to operate the appliance. Press the ‘Power’ button to activate the control and

elect one of massage types detailed below.

5. For an intense massage, remove the flap from the back of the cushion. For a gentler massage, keep the flap on

and you can soften the massage further by placing a towel between your back and the cushion.

6. Press the ‘Power’ button to stop the massage. The LED will blink while the massage mechanism returns to the

starting point before switching off.

Shiatsu Massage:

1. FULL: pressing this button gives a full Shiatsu massage up and down the back.

2. UPPER: pressing this button gives a Shiatsu massage focusing on the mid to upper back.

3. LOWER: pressing this button gives a Shiatsu massage focusing on the mid to lower back.

4. The ‘▲▼’ buttons allow you to target the massage to a specific area. Simply press either button to stop the

massage mechanism on the desired spot. Use the buttons to move it up or down.

5. To revert to standard massage mode, reselect one of the 3 massage zone buttons.

Rolling Massage:

1. FULL: pressing this button gives a full Rolling massage up and down the back.

2. UPPER: pressing this button gives a Rolling massage focusing on the mid to upper back.

3. LOWER: pressing this button gives a Rolling massage focusing on the mid to lower back.

4. Use the ‘

◄►

’ buttons to adjust the width of the massage mechanism.

Seat Massage:

This can be used with one of the above massages or on its own.

1. Press the ‘Seat’ button to activate the vibration massage.

2. Simply press the button again to increase intensity. The corresponding LED will illuminate to indicate your selection.

3. To switch off, simply press the button till the massage stops.

NOTE:

• Only gentle force should be exerted against the seat in order to eliminate risk of injury.

• There is a 15 minute auto shut-off on this appliance for your safety. This feature should not be considered as a

substitute for ‘OFF’. Always remember to switch the appliance off when not in use.

• Take care to position the product where it will not damage wooden or upholstered surfaces.

• When selecting the seat vibration massage with the Shiatsu or Rolling massages, there sill be a slight decrease in

the vibration strength. This is perfectly normal and should not be interpreted as a defect.

MAINTENANCE:

Cleaning

Unplug the appliance and allow to cool before cleaning. Clean only with a soft, slightly

damp sponge.

• Never allow water or any other liquids to come into contact with the appliance.

• Do not immerse in any liquid to clean.

• Never use abrasive cleaners, brushes, glass / furniture polish, paint thinner etc to clean.

Storage

Place the appliance in its box or in a safe, dry, cool place. Avoid contact with sharp

edges or pointed objects which might cut or puncture the fabric surface. To avoid breakage,

DO NOT wrap the power cord around the appliance. DO NOT hang the unit by the cord.

Plug (MODEL SBM-300-2GB ONLY)

If the plug on this appliance is damaged, it can be replaced with a BS 1363 plug,

fitted with a 3A BS 1362 fuse. Only use a 3amp fuse with this appliance.

Care must be taken when changing the plug. If in doubt, contact a qualified electrician.

Shiatsu Zone

Selector

Spot Shiatsu

Rolling Massage Zone

Selector

Width Adjustment

Seat Massage Selector

Removable Flap

Massage

Cushion

Power Button

Demo Button

Mains Adaptor

Version300new.qxd:Layout 1 7/2/07 16:19 Page 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Homedics SBM-300-2 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info