51
Shut down the time program by setting 00:00 hrs. as the end
time. 00:00 is automatically set as the end time, if 24 temperature
phases have been created.Program completion is indicated on
the display with "OK".
8.2 Setting the date and time "DAT"
Call up special function "DAT". Press the "OK" button to set the
time and date. Proceed as described previously in section "Start
up".
8.3 Actuator status query "VST"
You can show the opening status of the actuator, the battery sta-
tus and the status of the radio connection under this menu point.
Call up special function "VST".
Press the "OK" button to call up the information on the actuators.
The valve opening is indicated as a percentage on the display. If
the battery is low, the battery symbol will also be shown. If the
radio connection between the valve drive and the controller is
interrupted, the antenna symbols will also flash. Use the setting
dial to switch between the taught actuators.
8.4 Shutter contact status queries "WST"
You can query the current status of the shutter contacts or the
door window rotary handle sensors under this menu point.
Call up special function "WST".
