60
Adjusting the front seat height
Refer to the Safety Precautions on page 84.
The front seat can be adjusted to three
different heights.
To adjust the rider seat height
Remove the seat (page 59). Remove bolts
socket (1) of front subframe adjustment (2).
Remove bolts sockets (3) of rear subframe
adjustment (4).
Adjust them to the required position:
a) low
b) medium
c) high
Refit bolts socket (1) (3) of two subframes
(2)(4) and tighten to a following torque.
Torque: 22 N•m (2.2 kgf•m) (16 lbf•ft)
If the torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Reinstall the seat (page 59).
If the abovementioned subframe is removed
and re-installed contact your Honda dealer to
check correct installation.
NOTE
(1)
(2)
(1)
(3)
(4)
(a)
(b)
(c)
(a)
(b)
(c)
(1) Bolts socket
(2) Front subframe
(3) Bolts socket
(4) Rear subframe
