67
REMOVING THE HALF FAIRINGS
(CBF600S/SA)
The side fairings (1) must be removed in order
to perform maintenance in the area of the
headlight unit.
Removal:
1. Remove the two upper hex screws (2).
2. Remove the lower stud (3) from its seat by
pressing it in the centre and then
withdrawing it.
3. Remove the bolt (4). Disengage tabs (5)
from their locations, disengage the internal
adhesive cloth (6) on tank and slide the half
fairing forwards until it is freed from the front
interlocking feature (7).
4. Disconnect the front turn signals cable
connector.
Installation:
1. Reassemble the parts by following the
removal procedure in reverse.
(2)
(1)
(3)
(5)
(7)
(1) Left half fairing
(2) Socket screws
(3) Stud
(4) Bolt
(5) Tabs
(6) Adhesive cloth
(7) Front interlocking
feature
(6)
(4)