Installation:
1. Install the side collars into the left and right
side wheel hub.
Position the front wheel between the fork
legs and insert the front axle shaft (4) from
the left side through the left fork leg and
wheel hub.
2. Align the index line (6) of the front axle
shaft with the surface (7) of fork leg.
3. Tighten the axle pinch bolt (3) on the left
fork leg to the specified torque:
22 N•m (2,25 kgf•m,16 lbf•ft)
4. Tighten the axle bolt (5) to the specified
torque:
59 N•m (6,0 kgf•m, 43 lbf•ft)
5. Install the right and left brake calipers onto
the fork legs.
To avoid damaging the brake pads, carefully
fit the brake disks between the pads.
Take care not to damage the ABS sensor
(if present) on the right caliper.
(CBF600SA/NA)
6. Install the caliper fixing bolts and tighten to
the specified torque:
30 N•m (3,1 kgf•m, 22 lbf•ft)
7. Operate the front brake and pump the fork
several times.
Check for free wheel rotation after the
brake is released. Recheck the wheel if the
brake drags or the wheel does not rotate
freely.
114
(6)
(6) Index line
(7) Surface
(7)
