Bedienungsanleitung Honda ECMT7000 (Seite 14 von 28) (Englisch)

473953

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

GENERATING SET USE

OPERATION OF THE GENERATING SET

Your Honda generating set is a reliable piece of equipment,

developed to ensure your safety. It can help you carry out work

more easily and bring improvements to your leisure time, but there

is also a risk of electrocution if you do not follow strictly the

instructions for use given in this chapter.

• Never connect the generating set to a main socket.

• Do not connect any appliances to the receptacles before starting the generating set.

• Do not alter the internal wiring of the generator.

• Do not modify the engine adjustments. The frequency and voltage of the current

supplied by the generator are directly linked to the engine rotation speed. These

adjustments are carried out at the factory.

• Only connect appliances in good working order: most portable electrical tools are

Class II (double insulation). Equipment that does not meet this standard (tools with

metallic casing) has to powered via 3 conductor cable (with an earth conductor) to

ensure correct earthing in the event of an electrical fault.

• Supply only machines whose voltage, as specified on their rating plates,

corresponds to that produced by the generating set.

• Protection against electrical shock depends on circuit breakers specially matched

to the generating set. If the circuit breakers require replacement they must be

replaced with a circuit breaker having identical ratings and performance

characteristics.

• Due to high mechanical stresses only tough rubber-sheathed flexible cable (in

accordance with IEC 245-4) or the equivalent should be used.

• The generating set meets the protective measure "electrical separation with

equipotential bonding" as stated in the IEC 60364-4-41: dec 2005 §413. (and

VDE0100 part 728)

- The used power system is the IT system

- with neutral conductor N (for 3 phase machine) and

- non earthed equipotential bonding conductor PE, connecting all exposed

conductive parts of the generating set together.

- Earthing of the generator is for the proper function of this protective measure not

required.

- Only connect appliances in good working condition; most portable electrical tools

are Class II (double insulation). Equipment that do not meet this standard (tools

with metallic casing) have to be powered via 3-conductor cable (equipotential

conductor PE conductor).

- Earthing the neutral conductor of the generator or any point of the live conductors

(vs coils) like center tap, is in contradiction with the built-in protective measure.

- If the neutral conductor shall be earthed anyway, this may only be performed by

a professional electrician, implementing the additional safety devices required

together with the new protective measure (cf. IEC 364-4-41).

SAFETY

8 9 10

ANGLAIS.book Page 14 Lundi, 18. février 2008 11:11 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honda ECMT7000 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Honda ECMT7000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info