Bedienungsanleitung Honda ECT6D (Seite 13 von 24) (Englisch)

473942

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

GENERATING SET USE

OPERATION OF THE GENERATING SET

Your Honda generating set is a reliable piece of equipment, developed to ensure your safety. It

can help you carry out work more easily and bring improvements to your leisure time, but thereis

also a risk of electrocution if you do not follow strictlytheinstructionsforusegiveninthis chapter.

•

Never connect the generating set to a main socket.

•

Do not connect any appliances to the receptacles before starting the generating set.

•

Do not alter the internal wiring of the generating set.

•

Do not modify the engine adjustments. The frequency and voltage of the current supplied

by the generator are directly linked to the engine rotation speed. These adjustments are

carried out at the factory.

•

Only connect appliances in good working order: most portable electrical tools are Class II

(double insulation). Equipment that does not meetthis standard (tools withmetallic casing)

hastopoweredvia3conductorcable(withanearthconductor)toensurecorrectearthingin

the event of an electrical fault.

•

Supply only machines whose voltage, as specified on their rating plates, corresponds to

that produced by the generating set.

•

Protection against electrical shock depends on circuit breakers specially matched to the

generating set. If the circuit breakers require replacement they must be replaced with a

circuit breaker having identical ratings and performance characteristics.

• Dueto high mechanical stresses only tough rubber-sheathed flexible cable (in accordance

with IEC 245-4) or the equivalent should be used.

•

Earthing of the generator is not required.

•

This generating set is not recommended for use with electronic apparatus, such as

televisions, hi-fis, or microcomputers, which might not be compatible with it.

•

Avoid overloading the generating set; the following rules must be respected if the

generating set is to perform properly:

the sum of the power outputs of the machines connected simultaneously to the

generating set must be compatible with the characteristics given in the last pages of this

manual,

some appliances draw more power when starting up than their nominal power rating

(electric motors and compressors are examples). We recommend that you contact a

HONDA dealer in case of doubt,

do not exceed the maximum current specified for each receptacle.

•

The generating set must not be loaded to its nominal power if conditions are such that the

normal cooling requirements are not met. When using the generating set in unfavourable

conditions, take care to reduce the power load.

The ideal conditions of use are as follows:

atmospheric pressure: 100 kPa (1 bar),

ambient air temperature: 25 °C,

air humidity: 30 %.

8 10 11

SAFETY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honda ECT6D Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Honda ECT6D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info