Bedienungsanleitung Honda Fit 2017 (Seite 13 von 77) (Englisch)

667099

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

18 | | 19

SAFETYSAFETY

TABLE OF CONTENTS

INDEX

VISUAL INDEX

VOICE COMMAND

INDEX

SAFETY

INFORMATION

CUSTOMER

INFORMATION

INSTRUMENT PANEL

SPECIFICATIONS

VEHICLE

CONTROLS

MAINTENANCE

AUDIO AND

CONNECTIVITY

HANDLING THE

UNEXPECTED

BLUETOOTH®

HANDSFREELINK®

DRIVING

HONDALINK®

NAVIGATION

Installing a LATCH-Compatible Child Seat

A LATCH-compatible child seat can be installed in either of the two outer rear

seats. A child seat is attached to the lower anchors with either the rigid or ﬂexible

type of connectors.

1. Locate the lower anchors under the marks.

2. Raise the head restraint to its highest position.

3. Place the child seat on the vehicle seat, then

attach the child seat to the lower anchors

according to the instructions that came with the

child seat. Make sure that the lower anchors

are not obstructed by the seat belt or any other

object. If necessary, remove the cargo area

cover.*

4. Route the tether strap between the head restraint

legs. Make sure the strap is not twisted. Secure

the tether strap hook onto the anchor.

5. Tighten the tether strap according to the seat

manufacturer’s instructions.

6. Make sure the child seat is ﬁrmly secured by

rocking it forward and back and side to side; little

movement should be felt.

7. Make sure any unused seat belt that a child

can reach is buckled, the lockable retractor

is activated, and the belt is fully retracted and

locked. If necessary, reinstall the cargo area

cover.*

*if equipped (Canadian models)

Marks

Rigid type

Lower anchors

Flexible type

Anchor

Tether strap hook

Installing a Child Seat with a Lap/Shoulder Seat Belt

1. Raise the head restraint to its highest position.

2. Place the child seat on the vehicle seat.

3. Route the seat belt through the child seat

according to the seat manufacturer’s

instructions, and insert the latch plate into the

buckle. Insert the latch plate fully until it clicks.

4. Slowly pull the shoulder part of the belt all the

way out until it stops. This activates the lockable

retractor.

5. Let the seat belt completely wind up into the

retractor, then try to pull it out to make sure the

retractor is locked. If you are able to pull the

shoulder belt out, the lockable retractor is not

activated. Pull the seat belt all the way out, and

repeat steps 4 – 5.

6. Grab the shoulder part of the seat belt near the

buckle, and pull up to remove any slack from

the lap part of the belt. When doing this, place

your weight on the child seat and push it into the

vehicle seat.

7. Make sure the child seat is ﬁrmly secured by

rocking it forward and back and side to side; little

movement should be felt.

8. Make sure any unused seat belt that a child

can reach is buckled, the lockable retractor

is activated, and the belt is fully retracted and

locked.

To deactivate a lockable retractor, release the buckle and allow the seat belt to

wind up all the way.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honda Fit 2017 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info