Bedienungsanleitung Honda GXV57 (Seite 14 von 48) (Englisch, Französisch, Spanisch)

566433

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

××

−−

××

−

××

＊

ENGLISH

Specifications

Descriptive Term

Replacement Parts

Maintenance

Air Index

Applicable to Emissions Durability Period

Tuneup Specifications

ITEM SPECIFICATION MAINTENANCE

GXV50 (PTO shaft S type)

GXV57

249 286 225 mm

(9.8 11.3 8.9 in)

5.2 kg (11.5 lbs)

49.4 cm

(3.01 cu-in)

[41.8 36.0 mm (1.65 1.42 in)]

The emission control systems on your Honda engine were

designed, built, and certified to conform with EPA, California and

Canadian emission regulations. We recommend the use of

genuine Honda parts whenever you have maintenance done.

These original-design replacement parts are manufactured to the

same standards as the original parts, so you can be confident of

their performance. The use of replacement parts that are not of the

original design and quality may impair the effectiveness of your

emission control system.

A manufacturer of an aftermarket part assumes the responsibility

that the part will not adversely affect emission performance. The

manufacturer or rebuilder of the part must certify that use of the

part will not result in a failure of the engine to comply with

emission regulations.

Follow the maintenance schedule on page . Remember that this

schedule is based on the assumption that your machine will be

used for its designed purpose. Sustained high-load or high-

temperature operation, or use in unusually wet or dusty conditions,

will require more frequent service.

An Air Index Information hang tag/label is applied to engines

certified to an emission durability time period in accordance with

the requirements of the California Air Resources Board.

The bar graph is intended to provide you, our customer, the ability

to compare the emissions performance of available engines. The

lower the Air Index, the less pollution.

The durability description is intended to provide you with

information relating to the engine’s emission durability period.

The descriptive term indicates the useful life period for the engine’s

emission control system. See your

Emission Control System

Warranty

for additional information.

1.6 kW (2.2 PS, 2.1 bhp) at 7,000 rpm

Forced air

Transistor magneto

Counterclockwise

4-stroke, overhead valve, single cylinder

Moderate 50 hours [0 80 cm

(0 80 cc) inclusive]

125 hours [greater than 80 cm

(80 cc)]

Intermediate 125 hours [0 80 cm

(0 80 cc) inclusive]

250 hours [greater than 80 cm

(80 cc)]

Extended 300 hours [0 80 cm

(0 80 cc) inclusive]

500 hours [greater than 80 cm

(80 cc)]

1,000 hours [225 cm

(225 cc) and greater]

The Air Index Information hang tag/label must remain on the

engine until it is sold. Remove the hang tag before operating the

engine.

249 286 240 mm

(9.8 11.3 9.4 in)

5.4 kg (11.9 lbs)

4-stroke, overhead valve, single cylinder

57.3 cm

(3.50 cu-in)

[45.0 36.0 mm (1.77 1.42 in)]

1.5 kW (2.0 PS, 2.0 bhp) at 4,800 rpm

Forced air

Transistor magneto

Counterclockwise

0.27

(0.071 US gal , 0.059 Imp gal)

0.25

(0.26 US qt , 0.22 Imp qt)

2.7 N·m (0.28 kgf·m, 2.0 lbf·ft) at

4,500 rpm

0.27

(0.071 US gal , 0.059 Imp gal)

0.25

(0.26 US qt , 0.22 Imp qt)

3.2 N·m (0.33 kgf·m, 2.4 lbf·ft) at

4,000 rpm

The power rating of the engine indicated in this document is the

net power output tested on a production engine for the engine

model and measured in accordance with SAE J1349 at GXV50:

7,000 rpm , GXV57: 4,800 rpm (Net Power) and at GXV50: 4,500

rpm, GXV57: 4,000 rpm (Max. Net Torque). Mass production

engines may vary from this value.

Actual power output for the engine installed in the final machine

will vary depending on numerous factors, including the

operating speed of the engine in application, environmental

conditions, maintenance, and other variables.

Spark plug gap

Idle speed

Valve clearance

(cold)

Other

specifications

No other adjustments needed.

0.60 0.70 mm

(0.024 0.028 in)

Length Width

Height

Dry mass [weight]

Engine type

Displacement

[Bore Stroke]

Net power

Max. Net torque

Engine oil capacity

Fuel tank capacity

Cooling system

Ignition system

PTO shaft rotation

Length Width

Height

Dry mass [weight]

Engine type

Displacement

[Bore Stroke]

Net power

Max. Net torque

Engine oil capacity

Fuel tank capacity

Cooling system

Ignition system

PTO shaft rotation

2,500 200 rpm (GXV50)

IN: 0.08 0.02 mm

EX: 0.11 0.02 mm

Refer to page 9

See your

authorized

Honda dealer

(in accordance with SAE J1349 )

07/06/01 12:40:56 32Z4D602_014

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honda GXV57 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Honda GXV57

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info