3.6 GRASS-CATCHER ASSEMBLY
The grass-catcher is assembled in four stages:
A) First of all assemble the frame, joining the upper part (1) to the lower part (2)
using the supplied screws and nuts (3) as shown. Position the angle plates (4)
and (5), making sure that they are for the right (R) and left (L), sides, and
attach them to the frame using the four self-threading screws (6).
B) Insert the frame in the canvas cover (7) making
sure it is correctly positioned on the base perimeter.
Hook the plastic profiles onto the frame tubes with the
aid of a screw-driver (8).
C) Assembly the cover (9) on the upper frame by
means of the self-threading screws (10).
D) Attach the stiffening bar (11) under the frame with screws and nuts (12) kee-
ping the flat part turned towards the canvas. Insert the emptying lever (13) in its
position and put in the limit stop screw (14) with its nut (15).
EN 12 UNPACKING AND ASSEMBLY
