speed.
– Increasing pressure on the
pedal progressively increas-
es the speed of the machine.
– The pedal automatically goes
into neutral «N» when
released.
– The neutral condition «N» is
shown by the lighting of an
indicator light (4.10.g).
4.33 R
EVERSE PEDAL
This pedal engages reverse
drive in the wheels and modu-
lates the machine’s speed.
– Increasing pressure on the pedal progressively
increases the speed of the machine
– The pedal automatically goes into neutral «N»
when released.
– The neutral condition «N» is shown by the lighting of an indicator light
(4.10.g).
Reverse must be engaged only when the machine is
stopped.
If one of the drive pedals is used when the parking brake
(4.5) is engaged, the engine stops.
4.34 L
EVER TO RELEASE THE HYDROSTATIC TRANSMISSION
This lever has two positions as shown on the label:
«A» = Transmission engaged: for all usage conditions, when moving
and during cutting;
«B» = Transmission released: considerably reduces the effort required
for moving the machine by hand, with the engine turned off.
NOTE
̆
!
WARNING!
EN 21CONTROLS AND INSTRUMENTS
