6.3.6 ADJUSTMENT OF THE SPRING OF THE PAWL FOR HOOKING THE GRASS-CATCHER
If the grass-catcher tends to jump about and to
open up when going over rough ground, or if it is
difficult to hook back on after being emptied, the
tension of the spring will need to be adjusted(1).
Change the hooking point by using one of the holes
(2) until the required result is achieved.
6.4 DISMANTLING AND REPLACEMENT
6.4.1 O
IL ENGINE
Drain the oil while the engine is still
hot to ensure quick, complete drain-
ing.
Remove the filler cap with the dip-
stick and place a sheet of card-
board or something similar under
the drain tube to prevent the oil
from dripping onto the machine’s
chassis.
Unscrew plug (1); when refitting the
plug take care over the position of
the inner basket.
Fill with the recommended oil until the upper limit of the dipstick is reached
(*5.3.3). Screw the dipstick cap back on.
6.4.2. O
IL FILTER CHANGE
1. Drain the engine oil
(☛ 6.4.1).
2. Remove the oil filter (1) with a filter wrench (2) and let the remaining oil drain
out. Discard the oil filter.
3. Clean the filter base (3).
4. Coat the new O-ring (4) on the new filter with clean engine oil.
EN 52 MAINTENANCE
