Bedienungsanleitung Honda Honda Engines GSV190 (Seite 7 von 16) (Englisch)

13079

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

SPARK PLUG

Recommended Spark Plug: NGK BPR6ES

The recommended spark plug is the correct heat range for normal

engine operating temperatures.

NOTICE

Incorrect spark plugs can cause engine damage.

For good performance, the spark plug must be properly gapped and

free of deposits.

1. Disconnect the cap from

the spark plug, and

remove any dirt from the

spark plug area.

2. Use the proper size spark

plug wrench to remove the

spark plug.

3. Inspect the spark plug. Replace it if

damaged, badly fouled, if the

sealing washer is in poor condition,

or if the electrode is worn.

4. Measure the electrode gap with a

suitable gauge. The correct gap is

0.028 - 0.031 in (0.70 - 0.80 mm). If

adjustment is needed, correct the

gap by carefully bending the side

electrode.

5. Install the spark plug carefully, by

hand, to avoid cross-threading.

6. After the spark plug is seated, tighten with the proper size spark

plug wrench to compress the washer.

7. When installing a new spark plug, tighten 1/2 turn after the spark

plug seats to compress the washer.

8. When reinstalling the original spark plug, tighten 1/8 - 1/4 turn after

the spark plug seats to compress the washer.

NOTICE

Properly tighten the spark plug. A loose spark plug can become

very hot and can damage the engine. Overtightening the spark plug

can damage the threads in the cylinder head.

9. Attach the spark plug cap to the spark plug.

FLYWHEEL BRAKE INSPECTION

1. Remove the three flange

nuts from the recoil starter,

and remove the recoil

starter from the engine.

2. Remove the fuel tank from

the engine without

disconnecting the fuel

tube. If the fuel tank

contains fuel, keep it level

as you remove it and set it

beside the engine in a level

position.

3. Check the brake shoe

thickness. If it is less than

0.12 in (3 mm), take the

engine to your authorized

Honda servicing dealer.

4. Install the fuel tank and

recoil starter, and tighten

the three nuts securely.

SPARK ARRESTER (optional equipment)

In some areas, it is illegal to operate an engine without a USDA

(United States Department of Agriculture)-qualified spark arrester.

Check local laws and regulations. A USDA-qualified spark arrester is

available from an authorized Honda servicing dealer.

The spark arrester must be serviced every 100 hours to keep it

functioning as designed.

If the engine has been running, the muffler will be hot. Allow it to cool

before servicing the spark arrester.

Spark Arrester Removal

1. Remove the three 6 mm

bolts from the muffler

protector, and remove

the muffler protector.

2. Remove the two special

screws from the spark

arrester, and remove the

spark arrester from the

muffler.

Spark Arrester Cleaning & Inspection

1. Use a brush to remove carbon deposits

from the spark arrester screen. Be careful

not to damage the screen. Replace the

spark arrester if it has breaks or holes.

2. Install the spark arrester in the reverse

order of removal.

SPARK PLUG

WRENCH

0.028 ~ 0.031 in

(0.70 ~ 0.80 mm)

SEALING

WASHER

FLANGE NUTS (3)

FUEL TANK

FUEL

TUBE

RECOIL

STARTER

SPACER (3)

BRAKE SHOE

THICKNESS

SPARK ARRESTER

MUFFLER

PROTECTOR

6 mm BOLT (3)

SPECIAL

SCREW (2)

MUFFLER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honda Honda Engines GSV190 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Honda Honda Engines GSV190

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info