Bedienungsanleitung Honda Honda Engines GSV190 (Seite 11 von 16) (Englisch)

13079

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Air Index

An Air Index Information hang tag/label is applied to engines certified

to an emission durability time period in accordance with the

requirements of the California Air Resources Board.

The bar graph is intended to provide you, our customer, the ability to

compare the emissions performance of available engines. The lower

the Air Index, the less pollution.

The durability description is intended to provide you with information

relating the engine’s emission durability period. The descriptive term

indicates the useful life period for the engine’s emission control

system. See your Emission Control System Warranty (page 12) for

additional information.

The Air Index Information hang tag/label must remain on the engine

until it is sold. Remove the hang tag before operating the engine.

Specifications

GSV160

GSV190

Tuneup Specifications

Wiring Diagram

CONSUMER INFORMATION

Honda Publications

These publications will give you additional information for maintaining

and repairing you engine.You may order them from an authorized

Honda engine servicing dealer.

U.S.A. Distributor’s Limited Warranty

(1) Honda GS and GSV general purpose engines are not covered by

this warranty when installed on concession type vehicles.

To Qualify for this Warranty:

The Honda general purpose engine must be purchased from a Honda general purpose

engine dealer or distributor authorized to sell that product in the United States, Puerto Rico,

or the U.S. Virgin Islands. This limited warranty applies to first retail purchaser and each

subsequent owner during the applicable warranty time period.

What American Honda Will Repair or Replace Under Warranty:

American Honda will repair or replace, at its option, any part that is proven to be defective

in material or workmanship under normal use during the applicable warranty time period.

Warranty repairs and replacements will be made without charge for parts or labor. Anything

replaced under warranty becomes the property of American Honda Motor Company, Inc.

All parts replaced under warranty will be considered as part of the original product and any

warranty on those parts will expire coincident with the original product warranty.

To Obtain Warranty Service:

You must take your Honda general purpose engine, or the equipment in which it is

installed, together with proof of original retail purchase date, at your expense, to a Honda

engine dealer or distributor authorized to sell that product in the United States, Puerto Rico,

or the U.S. Virgin Islands, during their normal business hours. Many Honda engine dealers

and distributors are listed in the yellow pages of the telephone directory under gasoline

engines, lawn & garden equipment & supplies, etc.

If you are unable to obtain warranty service, or are dissatisfied with the warranty service

you receive, take the following steps: First contact the owner of the dealership or distributor

involved. Normally this should resolve the problem. However, if you are dissatisfied with

the decision made by the dealership's management, contact the Honda Regional Engine

Distributor for your area. You can find their name, address, and phone number using the

dealer/distributor locator on our website at (www.honda-engines.com) or by calling 1-800-

426-7701. If you are still dissatisfied after speaking with the Regional Engine Distributor,

you may contact the Honda Power Equipment Customer Relations Department of

American Honda Motor Co., Inc. Refer to page 13 for contact information.

Exclusions:

THIS WARRANTY DOES NOT EXTEND TO PARTS AFFECTED OR DAMAGED BY THE

PRODUCT IN WHICH THE ENGINE IS INSTALLED, OR BY ACCIDENT AND/OR

COLLISION, MISUSE, NEGLECT, PARTS WORN BEYOND SERVICE LIMITS DUE TO

NORMAL WEAR/NORMAL SERVICE LIFE, PARTS AFFECTED OR DAMAGED BY THE

CONVERSION TO OR USE OF FUEL OTHER THAN THE FUEL(S) WHICH THE

ENGINE IS ORIGINALLY MANUFACTURED TO USE, POOR OPERATION RELATED TO

FUEL CONTAMINATION OR FUEL QUALITY, PARTS DAMAGED BY FUEL

CONTAMINATION, THE INCORPORATION OF, OR USE OF, UNSUITABLE

ATTACHMENTS OR PARTS, THE UNAUTHORIZED ALTERATION OF ANY PART OR

ANY CAUSES OTHER THAN DEFECTS IN MATERIAL OR WORKMANSHIP OF THE

ENGINE. USE OF THE HONDA GENERAL PURPOSE ENGINE FOR RACING OR

COMPETITION WILL VOID THIS WARRANTY.

Disclaimer of Consequential Damage and Limitation of Implied Warranties:

AMERICAN HONDA DISCLAIMS ANY RESPONSIBILITY FOR LOSS OF TIME OR USE

OF THE ENGINE, OR THE EQUIPMENT IN WHICH THE ENGINE IS INSTALLED,

TRANSPORTATION, COMMERCIAL LOSS, OR ANY OTHER INCIDENTAL OR

CONSEQUENTIAL DAMAGE. ANY IMPLIED WARRANTIES ARE LIMITED TO THE

DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow

limitations on how long an implied warranty lasts and/or do not allow the exclusion or

limitation of incidental or consequential damages, so the above exclusions and limitations

may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary

from state to state.

International Warranty

See pages 14 and 15.

Descriptive Term Applicable to Emissions Durability Period

Moderate 50 hours (0–65 cc)

125 hours (greater than 65 cc)

Intermediate 125 hours (0–65 cc)

250 hours (greater than 65 cc)

Extended 300 hours (0–65 cc)

500 hours (greater than 65 cc)

Length x Width x Height 14.6 x 13.5 x 14.2 in

(370.5 x 342.5 x 360 mm)

Dry weight 28.2 lb (12.8 kg)

Engine type 4-stroke, overhead cam, single cylinder

Displacement

[Bore x Stroke]

9.8 cu in (160 cm

)

[2.5 x 2.0 in (64 x 50 mm)]

Maximum output 5.5 bhp (4.1 kW, 5.5 PS) at 3,600 rpm

Maximum torque 8.41 ft-lb (11.4 N•m, 1.16 kg/m) at 2,500 rpm

Fuel consumption 0.51 lb/hph (313 g/kWh, 230 g/PSh)

Cooling system Forced air

Ignition system Transistorized magneto

PTO shaft rotation Counterclockwise

Length x Width x Height 14.6 x 13.5 x 14.2 in

(370.5 x 342.5 x 360 mm)

Dry weight 28.7 lb (13.0 kg)

Engine type 4-stroke, overhead cam, single cylinder

Displacement

[Bore x Stroke]

11.4 cu in (187 cm

)

[2.7 x 2.0 in (69 x 50 mm)]

Maximum output 6.5 bhp (4.8 kW, 6.5 PS) at 3,600 rpm

Maximum torque 9.74 ft-lb (13.2 N•m, 1.35 kg/m) at 2,500 rpm

Fuel consumption 0.51 lb/hph (313 g/kWh, 230 g/PSh)

Cooling system Forced air

Ignition system Transistorized magneto

PTO shaft rotation Counterclockwise

ITEM SPECIFICATION MAINTENANCE

Spark plug gap 0.028 – 0.031 in (0.7 – 0.8 mm) Refer to page 7.

Valve clearance (cold) IN: 0.15 ± 0.04 mm

EX: 0.20 ± 0.04 mm

See your authorized

Honda dealer

Other specifications No other adjustments needed.

IGNITION

COIL

SPARK

PLUG

ENGINE STOP

SWITCH

Shop Manual This manual covers complete maintenance and overhaul

procedures. It is intended to be used by a skilled

technician.

Parts Catalog This manual provides complete, illustrated parts lists.

PRODUCTS COVERED BY

THIS WARRANTY:

LENGTH OF WARRANTY:

(FROM DATE OF ORIGINAL PURCHASE)

PRODUCT APPLICATIONS NONCOMMERCIAL/

NONRENTAL

COMMERCIAL RENTAL

GS & GSV

Series

Engines

All 24 months 12 months 3 months (1)

Honda Honda Engines GSV190 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Honda Honda Engines GSV190

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info