Bedienungsanleitung Honda HRX537 HYEA (Seite 10 von 23) (Englisch)

580898

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

ENGLISH

NOTICE

When the carburetor has been modified for high altitude operation,

the air-fuel mixture will be too lean for low altitude use. Operation at

altitudes below 1,500 meters with a modified carburetor may cause

the engine to overheat and result in serious engine damage. For use

at low altitudes, have your authorized Honda dealer return the

carburetor to original factory specifications.

OPERATING THE CONTROLS FOR MOWING

Throttle Lever

For best cut quality, always mow with

the throttle lever [1] in the FAST

position [2]. When the blades rotate at

the preset fast speed, it creates a

strong fan action that lifts and cuts

grass more efficiently.

Do not try to increase the preset engine

speed; the blade could fracture and

come apart.

Blade Control Lever

To start blade rotation, press the

yellow button [1] on top of the

blade control lever [2], then

push the lever forward and hold

it against the handlebar.

Release the blade control lever

[2] to stop the blade.

Operate the blade control lever

with a quick and complete

motion, so the blade control is

always either fully engaged or

disengaged. This will help to

prevent stalling the engine, and it will help prevent damage to the

blade control mechanism.

Drive Clutch Lever

Push the drive clutch lever [1] forward to propel the mower forward.

For self-propelled mowing,

press the yellow button [2]

on top of the blade control

lever [3], push the blade

control lever forward to the

handlebar, and then push

the drive clutch lever [1]

forward.

Release the drive clutch

lever [1] to stop the

mower's forward movement.

You can control mower speed with the drive clutch lever [1]. The

mower will move gradually faster as you push the lever forward. If you

push the lever all the way up to the handlebar, the mower will move at

the speed determined by the shift lever setting.

Shift Lever

Use the shift lever [1] to select the

forward speed at which you wish to

mow.

Do not use the throttle lever to

adjust your forward speed. The

throttle lever must remain in the

fast position for good mowing

performance. Otherwise, cut quality

suffers.

Use the lower speed range for

mulching and bagging, the higher

speed range for transporting.

With the shift lever all the way back and the drive clutch lever

engaged, the mower will move slowly or not at all.

STOPPING THE ENGINE

1. Release the drive clutch lever [1] and blade control lever [2].

2. HYEA type: Move the throttle lever [1] to the STOP position [2] to

stop the engine.

HZEA type: Turn the key switch to the OFF [3] position.

3. When the mower is not in use, turn the fuel valve to the OFF

position.

STOP

[2]

[1]

[2]

[1]

[2]

[3]

THROTTLE

STOP or SLOW

FAST

[1]

[2]

[1]

[2]

STOP

HYEA TYPE HZEA TYPE

[3]

OFF

HYEHZE bk1.book Page 10 Monday, September 8, 2008 9:46 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honda HRX537 HYEA Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Honda HRX537 HYEA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info