610602
14
Zoom out
Zoom in
Vorherige Seite
1/86
Nächste Seite
Installation
12
Installation
We strongly recommend that an authorised Honda dealer performs the installation of your Robotic
Lawnmower. Installation by an authorised Honda dealer will ensure that your system is working correctly.
Checking conditions for installation
Check with the dealer that performed the installation if the docking station and boundary wire are installed
according to the conditions below. Also periodically conrm that these conditions are still met.
If any of these conditions are not met, consult your dealer.
It is recommended that the mains power supply is professionally installed in line with local laws and regulations.
Conditions for installing the docking station
Image Condition
5° (8.7%)
5° (8.7%)
5° (8.7%)
5° (8.7%)
The docking station must be installed on a at
surface with an inclination of no more than 5°
(8.7%).
The docking station must not be curved.
The screws must be rmly tightened.
Before installing the docking station, check the
ground condition which may vary seasonally. It
may be necessary to maintain the ground with
the season.
If installing the docking station directly on
the lawn, cut the grass on which the docking
station will be located as short as possible.
Because of a wrong installation of the docking
station, the lawnmower may not be charged.
Type 2
Right side wire connector
(Type 0)
Boundary
wire
length
Docking direction
CW (Clockwise)
ACW (Anti-clockwise)
Left side wire
connector
Right side wire
connector
Left side wire
connector
Right side wire
connector
0-800 m Type 2 Type 0 Type 2 Type 0
You need to set the loop direction CW
(Clockwise) or ACW (Anti-clockwise) when the
lawnmower returns to the docking station.
You also need to connect the connectors of the
boundary wire with the terminals of the docking
station with reference to the left table.
NOTE:
- If your lawnmower is HRM310, the max
length of the boundary wire is 400 m.
More than
1 m
0-20 cmMore than
2 m
More than
1 m
1 m
2 m
Corner
Pattern A Pattern B
The boundary wire must be laid according to
the gure on the left (Pattern A or Pattern B).
There must be no obstacles as follows:
Pattern A: within 1 m from the station
Pattern B: within 2 m from the station
There must not be foreign objects within the
work area near the docking station (in the
shaded area indicated in the image).
The boundary wire under the docking station
must be laid toward the outside of the work
area.
Have your dealer install the short cut wire.
VP7Z.indb 12 2014/12/18 14:25:57
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

honda-miimo-hrm-520

Suche zurücksetzen

  • möchte den roboter unter tags einmal ohne zeit laufen lassen Eingereicht am 2-5-2023 09:26

    Antworten Frage melden
  • In der Garteneinstellung den Prozentanteil verstellen Eingereicht am 20-6-2021 14:21

    Antworten Frage melden
  • Der Rasenroboter zeigt die Störung Schleifensignal nicht gefunden. Was muss ich tun? Eingereicht am 5-8-2019 13:49

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Honda Miimo HRM 520 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Honda Miimo HRM 520

Honda Miimo HRM 520 Bedienungsanleitung - Deutsch - 86 seiten

Honda Miimo HRM 520 Bedienungsanleitung - Holländisch - 86 seiten

Honda Miimo HRM 520 Bedienungsanleitung - Französisch - 86 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info