Bedienungsanleitung Honda Miimo HRM3000 (Seite 79 von 112) (Englisch)

720161

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

7 TROUBLESHOOTING

Resolving problems

Unless having the power on is necessary to check something, turn off the power when checking the

condition of the lawnmower or the blade.

Problem Solution

The lawnmower cannot be

charged.

Check the cable connections, conrm that the docking station’s LED indicator

is on (LED indicator should turn on), check that there are no foreign material

in the charging socket that prevent a good electrical connection, and charge

the lawnmower again.

If the lawnmower still cannot be charged, contact your dealer.

The lawnmower will not enter an

area, or the blades and movement

have stopped.

The lawnmower will try to evade an area with a slope of more than 20°. In the

case of a 25 – 30deg slope (depending on unevenness of the ground)

- The lawnmower will try to escape from the slope

In the case of a slope more than 30deg slope

- The lawnmower will try to evade an area a few seconds and stop due to

“Excessive tilt”

The lawnmower stops frequently. Operation of this product with other wireless devices, remote controls, or

electric fences is not guaranteed. Contact your dealer.

The lawnmower leaves the preset

area or behaves differently from

the settings.

See the error message on the screen and follow the instructions before

contacting your dealer. If you cannot solve the issue, contact your dealer with

the error messages ready.

The boundary wire has slackened

and come out of the ground or a

peg has come out of the ground.

Stop the lawnmower because it may cut the wire.

Be careful not to trip on the boundary wire or peg. Contact your dealer.

A strange noise is heard from the

lawnmower or the lawnmower

vibrates.

Check the blades if they are broken or not. Broken blades can create an

unbalanced blade disc. It can create noise.

Try to use “Quiet timer”.

Contact your dealer if it cannot be solved.

The lawnmower does not leave

the docking station. No error

message is displayed.

- Timers were not set up correctly. Check the timer settings. See “4 MENU

SETTINGS” (M page

32).

- The Date and Time are incorrect. Check the clock (M page 59).

- The manual STOP button was pressed, but the H button was not pressed

before closing the control panel cover.

- The lawnmower is in inactive mode.

Another cause could be that the machine is in “Home” mode.

- The lawnmower in the Auto mode will always charge the battery up to 100%.

If you want to make the lawnmower to start mowing sooner, change the

operating mode to the Manual mode.

Poor mowing results. - The cutting height is incorrect or the grass is too high. Adjust the cutting

height or cut with a standard lawnmower rst if the grass is too high.

- Check the condition of the blades (M page 86).

The lawnmower does not work

inside the boundary wire.

- If there are electromagnetic and electric elds near the boundary wire such

as power line, factory, electric noise might affect the movement of your

lawnmower. Contact your dealer.

The lawnmower is found stopped,

and switched off in the garden.

A power failure occurred. The lawnmower behaves as follows:

In case that the power supply is cut off for more than 30 minutes, the lawnmower

will shut off automatically to prevent the battery from becoming empty.

In case that the power supply comes back within 30 minutes, the lawnmower

will start mowing automatically. *

* The lawnmower will return to the docking station if the battery residual

capacity is low.

The lawnmower goes out of the

boundary wire.

Record where the lawnmower goes out of wire.

Check the ground condition, weather condition and tyre condition when the

lawnmower goes out of the boundary wire. Clean up the tyre if it has any mud,

leaves, or grass. Try to continue. If the issue occurs frequently, contact your dealer.

The lawnmower does not dock

into the docking station.

Check station condition if it deformed or not. Check boundary wire underneath

the station (M page 12). Clean up the charging socket of both the lawnmower

and station.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honda Miimo HRM3000 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Honda Miimo HRM3000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info