86
ABS Indicator Light
(NT700VA)
Normally, this light comes on when the
ignition is turned ON, and goes off after you
ride the motorcycle at speed above 10 km/h
(6 mph). If there is an ABS problem, the
indicator light flashes and remains on. The
ABS system does not operate when the ABS
indicator light is on.
If the ABS indicator light comes on while
riding, stop the motorcycle in a safe place
and turn off the engine.
Turn the ignition ON again. The light should
come on, and go off after you ride the
motorcycle at speeds above 10 km/h (6
mph). If it does not go off, ABS is not
functioning, but the brakes still work the
Combined Brake System and provide normal
stopping ability. However, you should have
the system checked by Honda dealer as
soon as possible.
The ABS indicator light may flash if you turn
the rear wheel while the motorcycle is upright
on the stand. This is normal. Turn the ignition
OFF, then turn it ON. The indicator should
come on, then go off after you run the
motorcycle above 30 km/h (19 mph).
