Bedienungsanleitung Honeywell CT2400 (Seite 4 von 14) (Englisch)

32341

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Install The Batteries

IMPORTANT: Batteries must be installed for

programming and operation of the thermo-

stat and heating/cooling system.

❑

Purchase two AA alkaline batteries;

non-

alkaline batteries will not last as long, and may

leak, causing damage to thermostat or wall

surface. We recommend Energizer batteries.

•l Make sure the thermostat is set in the OFF

position.

Use a coin to remove battery door.

❑

Install the fresh batteries as shown,

making sure positive and negative terminals

are oriented correctly.

Replace battery door.

—

flashing. “bAt Lo” will stay on without flashing,

indicating the thermostat and heating/cooling

system have stopped working and the

batteries are almost completely dead.

After the batteries are completely dead, the

“bAt Lo” indicator will disappear, leaving a

completely blank display.

Press down on left ends of batteries to

remove. If you insert the new batteries within

INSTALL TWO AA ALKALINE

/BATTEFIIESASStiOIAIN

E=l

M171

M1779B

As the batteries are running low, a “bAt Lo”

indicator will flash for one to two months

before batteries run out completely. Replace

the batteries as soon as possible after the

indicator starts flashing. If you do not replace

the batteries sometime during the flashing

“bAt Lo,” the indicator will eventually stop

20 to 30 seconds of removing the old ones,

you will not have to reprogram the thermostat.

However, if the display is blank, the batteries

are dead or incorrectly installed, and you will

have to reprogram. See pages 12 and 13 to

reprogram.

IMPORTANT: Although the thermostat has a

low battery indicator, replace the batteries

once a year to prevent the thermostat and

heatinrjcooling

system from shutting down

due to lack of battery power.

As a precaution, when leaving home for

longer than a month, change batteries before

you leave to prevent the system from shutting

down due to lack of battery power.

Program The Thermostat

After the batteries are installed, the thermostat

can be easily programmed in your hand

before it is installed on the wall.

If you would prefer to program the thermostat

after it is installed on the wall, skip to page

and return later to this programming section.

The following personal programming chart

(pages 10 to 11 ) may be helpful for planning

your program schedule of time and tempera-

ture settings for various times of the day.

Four time periods are available during

weekdays — “WAKE,” “LEAVE,” “

TURN,” and “SLEEP.” These periods can

be seen individually on the display as you

press the SET SCHEDULE key.

‘WAKE”

is the time period you want the

house at a comfortable temperature when

you get up and while you get ready for work

or school. (This will be a higher temperature

during heating season, or a lower tempera-

ture during cooling season.)

“LEAVE” is the time period you can set for

an energy-saving temperature while you are

away at work or school. (This will be a lower

temperature during heating season, or a

higher temperature during cooling season.)

“RETURN” is the time period you want the

house at a comfortable temperature for

activities before bedtime. (Again, higher

heat or lower cool.)

“SLEEP” is the time period you can set for

an energy-saving temperature while you are

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell CT2400 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Honeywell CT2400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info