Bedienungsanleitung Honeywell HCE309 (Seite 5 von 21) (Englisch, Französisch, Spanisch)

723874

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

TROUBLESHOOTING

Problem Solution

If your Honeywell Ceramic Tower

Heater shuts o unexpectedly or fails

to operate, one of your heater safety

features may have been activated to

prevent overheating.

• Be sure it is plugged in and that the electrical outlet is working.

• Check for any obstructions. If you nd an obstruction, turn the heater OFF ()

and unplug it.

• Allow the heater to cool completely, then remove the obstruction. Wait at least

10 minutes, then re-plug the heater in and follow the OPERATION instructions.

• Periodic cleaning of the lter is recommended. Turn O ( )

and unplug heater. Allow it to cool. Remove the Filter Cover

and clean/vacuum the Filter. (Fig. 4)

NOTE: This pertains to all heaters in the HCE300 Series with the

exception of the HCE317 units. The HCE317 units do not contain a

permanent lter.

• It is recommended that the Ceramic Tower Heater be cleaned

at least once a month and before o-season storage.

• Turn O ( ) and unplug heater. Use a dry cloth only to clean

the external surfaces of the heater. DO NOT USE WATER,

WAXES, POLISHES, OR ANY CHEMICAL SOLUTION.

• Clean the Ceramic Tower Heater using the above-mentioned steps.

Wrap the cord around the unit. Place in its original box and store

it in a cool, dry place.

• This heater does not disassemble.

CLEANING AND STORAGE

Fig. 4 Filter Cover

Model(s) Unit dims Amps Unit Voltage Max Watts Max BTUs

HCE305/HCE309/

HCE311/HCE351 Series

8.74”L x 6.69”W x 12.8”H 3.19lbs 12.5 120V, 60Hz 1500 5118

HCE317 Series 8.74”L x 6.69”W x 21.65”H 4.41lbs 12.5 120V, 60Hz 1500 5118

HCE322/HCE352 Series 8.74”L x 6.69”W x 21.65”H 4.41lbs 12.5 120V, 60Hz 1500 5118

HCE323/HCE353 Series 8.74”L x 6.69”W x 23.15”H 4.56lbs 12.5 120V, 60Hz 1500 5118

PRODUCT SPECIFICATIONS

Operation Cost*

To estimate the cost to operate this heater, multiply the watts used by 0.001 to convert into kilowatts used. Then, multiply the

kilowatts used by your local kilowatt hour electric rate and the length of time for which you run the heater. For example, if your

electric rate is $0.1290**per kilowatt hour and you ran this heater in constant high mode (1500 watts) for 4 hours, it would cost

you $.77 cents to run the heater (1500 watts x 4 hours x 0.001) x 0.1290kwp = $0.77 cents).

NOTE: Because the Low setting does not require as much electricity to operate, it is more energy ecient and may be a better

option if you are concerned about the higher power consumption when the heater is on the High setting.

*Calculation (Power in Watts x 0.001 x Cost per Kilowatt Hour x Hours Used = Cost to Operate).

**Average Retail Price of Electricity to Ultimate Customer by End-Use, US Energy Information Administration, August 2016.

Filter

NOTE: HCE317 series does not include a lter cover

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell HCE309 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info