Bedienungsanleitung Honeywell HCE643 series (Seite 4 von 16) (Englisch, Französisch, Spanisch)

724046

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

• To select a heat setting, press ( ). There are 4 comfort settings available to choose from - Gentle Warmth,

Cozy, Toasty, Heat Blast - with each setting designed to provide both a unique heat and sound level based on

your desired needs.

NOTE: see next section for an overview of each of the heat settings.

• Press the Timer Button (

) to select 1, 2, 4, or 6 hour setting. The heater will run for that chosen period in the

selected setting/mode, counting down the hours and automatically shutting the heater off after the selected

time has passed.

• The ComfortTemp™ 4 Ceramic Heater has an oscillation feature. Press the Oscillate Button (

) to turn on

or off the oscillation function.

• To shut the heater off, press the Power Button (

) and the heater will begin Powering Down. The heater will

shut off after counting down 10 seconds to cool down the internal components.

• It is important to allow the heater to run through the cool down phase. DO NOT unplug the heater until it has

completed the cool down phase.

4 COMFORT SETTINGS THAT YOU ADJUST TO YOUR NEEDS

SAFEGUARD® AUTO SHUT-OFF FEATURE

Once your heater is ON, use the heat setting control button ( )

on the front panel to select the desired heat setting for your needs.

Your heater will start on the highest setting (Heat Blast) each time

you turn on the heater. Below is a handy reference to help select

the heat option that best suits your desired comfort level. (Fig. 3)

GENTLE WARMTH – (LOW HEAT)

This setting provides a soft, more personal touch of warmth.

COZY – (MEDIUM HEAT)

Ideal for personal and small areas, this setting slightly steps up

the heat output for soothing, comforting heat.

TOASTY – (MODERATE-HIGH HEAT)

Gradually increasing the heat level, this setting is perfect for

creating that comforting room environment.

HEAT BLAST – (HIGH HEAT)

Choose this maximum heat setting to quickly remove chill and deliver comforting, quick heat.

The Honeywell ComfortTemp™ 4 Ceramic Heater is enhanced with a SafeGuard® Auto ShutOff feature. This

innovative feature is designed to automatically shut the heater off after 8 hours of continuous use and provides

an extra layer of protection for peace-of-mind.

How it works: By default, the ComfortTemp™ 4 Ceramic Heater comes with the Auto ShutOff feature engaged.

If you chose to operate the heater in the Auto ShutOff mode (

), the heater will shut off automatically after 8

hours every time the heater is used, unless the heater is turned off prior to the 8 hour auto-off time. All features

are functional while operating in the Auto ShutOff feature. If you choose to disengage this feature, the unit will

operate in the Continuous heat mode (

) .

• Press the SafeGuard® Auto ShutOff switch on the

back of the unit (Fig. 4) to select either the Auto Shut-

Off or Continuous heating modes. The corresponding

icon will illuminate on the controls to indicate which

mode you are in.

Fig. 4

SafeGuard® Auto Shut-Off

Heat

Setting

Fig. 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell HCE643 series Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info